2 open source boards using the Flash ROM

Real designs built with the Flash ROM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The Flash ROM in open source designs

The gallery holds 2 open source boards using the Flash ROM from 2 GitHub repositories; a typical one measures about 139.7 × 101.6 mm and carries around 53 components.

0% carry an open source license.

The most starred is Monster fdc by skiselev.

Flash ROM: common questions

Where can I find a Flash ROM reference design?

Each of the 2 boards on this page is a real design using the Flash ROM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the Flash ROM?

The 16C550, 74AHCT138, 74HCT688, 82077AA and EEPROM appear in the most repositories here.

How big is a typical board using the Flash ROM?

The median is 139.7 × 101.6 mm.

What is the most popular open source board using the Flash ROM?

By GitHub stars, Monster fdc by skiselev, with 78 stars.

Can I simulate one of these boards using the Flash ROM before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part