7 open source boards using the 16C550

Real designs built with the 16C550, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 16C550

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 16C550 connects to, and the resistors, capacitors and other passives placed on it.

  • The DDIS_23 pin is left unconnected on 6 of 6 designs.
  • The XOUT_17 pin is left unconnected on 5 of 6 designs.
  • The RD_22 pin is tied to GND on 5 of 6 designs.
  • The ADS_25 pin is tied to GND on 5 of 6 designs.
BAUDOUT_15pin 15Connected to: Not connected 67% · VCC 33%
XIN_16pin 16Connected to: Signal 100%
  • Pull-up to VCC on 33% · 10 kΩ (2)
  • Crystal on 33% · 1.8432 MHz (2)
XOUT_17pin 17Connected to: Not connected 83% · GND 17%
WR_18pin 18Connected to: Signal 83% · GND 17%
  • Crystal on 33% · 1.8432 MHz (2)
GND_20pin 20Connected to: GND 67% · a signal 33%
RD_22pin 22Connected to: GND 83% · not connected 17%
DDIS_23pin 23Connected to: Not connected 100%
ADS_25pin 25Connected to: GND 83% · a signal 17%
OUT1_34pin 34Connected to: Not connected 67% · a signal 33%
VCC_40pin 40Connected to: 5V 50% · a signal 50%
  • Capacitor to GND on 50% · 100 nF (3)
Pin 44Connected to: VCC 67% · a signal 33%
  • Decoupling capacitor on 67% · 100 nF (2)

33 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Monster fdc by skiselev, Z80SERIAL2 by lynchaj, EX-HX-Combo by JayesonLS and Project RackZ80 - Serial RS232 by jkreucher.

The 16C550 in open source designs

The gallery holds 7 open source boards using the 16C550 from 6 GitHub repositories; a typical one measures about 139.7 × 100 mm and carries around 42 components.

80% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Monster fdc by skiselev.

What boards using the 16C550 are built for

16C550: common questions

Where can I find a 16C550 reference design?

Each of the 7 boards on this page is a real design using the 16C550. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 16C550 DDIS_23 pin connected?

The DDIS_23 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 16C550.

How is the 16C550 XOUT_17 pin connected?

The XOUT_17 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 16C550.

How is the 16C550 RD_22 pin connected?

The RD_22 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 16C550.

What parts are used alongside the 16C550?

The GD75232N, 74AHCT138, 74HCT688, 74LS32 and 82077AA appear in the most repositories here.

How big is a typical board using the 16C550?

The median is 139.7 × 100 mm, and 80% are two-layer designs.

What is the most popular open source board using the 16C550?

By GitHub stars, Monster fdc by skiselev, with 78 stars.

Can I simulate one of these boards using the 16C550 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part