12 open source boards using the 74AHCT138
Real designs built with the 74AHCT138, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456Monster fdc
skiselev
139.7 × 101.6 mm53 partsNo license78Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040AVR/Arduino
OtterX
RetroRemake
170.1 × 170.1 mm168 parts4LCERN-OHL-W-2.040Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07Rc cfcard
PickledDog
99.1 × 49.9 mm13 parts2LApache-2.07Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05Z80-CPM
skiselev
101.6 × 53.3 mm28 parts2LCERN-OHL-S-2.04Monster fdc
Vakon84
139.7 × 101.6 mm53 partsNo license0Rc cfcardh
PickledDog
99.1 × 49.9 mm13 parts2LApache-2.07ExpansionBoard
MicroLind-Developers
170.2 × 170.2 mm43 parts4LCERN-OHL-P-2.00Zx50 Serial
mmosko
132.1 × 81.9 mm24 parts4LNo license0
How designs wire the 74AHCT138
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 74AHCT138 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF.
- The E3 pin is tied to VCC on 7 of 11 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| E3pin 6 | Connected to: VCC 64% · a signal 36% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Monster fdc by skiselev, Omega-Mainboard by merlinkv and OtterX by RetroRemake.
The 74AHCT138 in open source designs
The gallery holds 12 open source boards using the 74AHCT138 from 11 GitHub repositories; a typical one measures about 154.9 × 125.7 mm and carries around 53 components.
70% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74AHCT138
Microcontrollers on boards using the 74AHCT138
What boards using the 74AHCT138 are built for
74AHCT138: common questions
Where can I find a 74AHCT138 reference design?
Each of the 12 boards on this page is a real design using the 74AHCT138. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHCT138 VCC pin?
The VCC pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the 74AHCT138.
How is the 74AHCT138 E3 pin connected?
The E3 pin is tied to VCC on 7 of 11 designs (a signal on 4). Counted from the KiCad layouts of 11 open source designs using the 74AHCT138.
What parts are used alongside the 74AHCT138?
The 74AHCT32, SST39SF040, AS6C4008, 74AHCT125 and 74F245 appear in the most repositories here.
Which microcontrollers do boards using the 74AHCT138 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74AHCT138?
The median is 154.9 × 125.7 mm, and 70% are two-layer designs.
What is the most popular open source board using the 74AHCT138?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74AHCT138 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.