8 open source boards using the GD75232N
Real designs built with the GD75232N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Monster fdc
skiselev
139.7 × 101.6 mm53 partsNo license78PCSuperCombo
JayesonLS
123.3 × 95 mm39 parts2LMIT21ISA DualUARTParport
hkzlab
176.5 × 90.2 mm69 parts2LCC-BY-NC-4.018ISA QuadUART2
hkzlab
104.1 × 102.9 mm39 parts2LCC-BY-SA-4.09Monster fdc
Vakon84
139.7 × 101.6 mm53 partsNo license0EX-HX-Combo
JayesonLS
125.5 × 99 mm37 parts2LMIT21PikaPC Host
techav-homebrew
101.6 × 101.6 mm122 parts4LNo license3PikaPC Mainboard
techav-homebrew
190.5 × 147.3 mm71 parts2LNo license3
How designs wire the GD75232N
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the GD75232N connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
- The VSS pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 12V 83% · a signal 17% | — |
| VSSpin 10 | Connected to: -12V 83% · a signal 17% |
|
| GNDpin 11 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: VCC 100% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Monster fdc by skiselev, EX-HX-Combo by JayesonLS, ISA DualUARTParport by hkzlab and ISA QuadUART2 by hkzlab.
The GD75232N in open source designs
The gallery holds 8 open source boards using the GD75232N from 6 GitHub repositories; a typical one measures about 132.6 × 101.6 mm and carries around 53 components.
83% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Monster fdc by skiselev.
Parts used alongside the GD75232N
What boards using the GD75232N are built for
GD75232N: common questions
Where can I find a GD75232N reference design?
Each of the 8 boards on this page is a real design using the GD75232N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the GD75232N VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the GD75232N.
What decoupling capacitors do designs use on the GD75232N VSS pin?
The VSS pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the GD75232N.
What parts are used alongside the GD75232N?
The 16C550, 74AHCT138, 74HCT688, 74LS244 and 74LS245 appear in the most repositories here.
How big is a typical board using the GD75232N?
The median is 132.6 × 101.6 mm, and 83% are two-layer designs.
What is the most popular open source board using the GD75232N?
By GitHub stars, Monster fdc by skiselev, with 78 stars.
Can I simulate one of these boards using the GD75232N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.