9 open source boards using the FT230XQ-R
Real designs built with the FT230XQ-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Capes
beagleboard
111.5 × 55.8 mm91 parts2LNo license49FaradayRF-Hardware
FaradayRF
74.9 × 53.3 mm139 parts4LTAPR-OHL-1.043Obc hardware
SFUSatClub
95.9 × 90.2 mm123 parts2LNo license10Usb uart shift
florolf
34.4 × 16 mm40 parts2LNo license7Mangoh red
leoheck
70 × 61.8 mm555 parts6LMPL-2.05STM32
Moducard cm5-module
Dominik-Workshop
100 × 100 mm246 parts4LMIT5Mip servo controller
Mipot-Hi-Tech
100 × 90 mm202 parts4LCustom license3ESP32
Fibel2
nikolozka
210 × 148 mm434 parts4LNo license0STM32
Dsv4
suzizecat
188 × 110 mm250 parts4LNo license0
How designs wire the FT230XQ-R
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the FT230XQ-R connects to, and the resistors, capacitors and other passives placed on it.
- The USBDP pin has a series resistor on 8 of 9 designs, most often 27 Ω (then 33 Ω).
- The USBDM pin has a series resistor on 8 of 9 designs, most often 27 Ω (then 33 Ω).
- The VCCIO pin has a capacitor to GND on 7 of 9 designs, most often 100 nF.
- The 3V3OUT pin has a capacitor to GND on 7 of 9 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCIOpin 1 | Connected to: Signal 89% |
|
| RXDpin 2 | Connected to: Signal 100% |
|
| GNDpin 3, 13, 17 | Connected to: GND 89% | — |
| CTSpin 4 | Connected to: Not connected 56% · a signal 44% |
|
| USBDPpin 6 | Connected to: Signal 100% |
|
| USBDMpin 7 | Connected to: Signal 100% |
|
| 3V3OUTpin 8 | Connected to: Signal 89% |
|
| RESETpin 9 | Connected to: Signal 100% |
|
| VCCpin 10 | Connected to: 5V 56% · a signal 44% |
|
| CBUS0pin 12 | Connected to: Not connected 67% · a signal 33% | — |
| CBUS3pin 14 | Connected to: Not connected 78% · a signal 22% | — |
| TXDpin 15 | Connected to: Signal 100% |
|
| RTSpin 16 | Connected to: Signal 56% · not connected 44% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Capes by beagleboard, FaradayRF-Hardware by FaradayRF, Obc hardware by SFUSatClub and Usb uart shift by florolf.
The FT230XQ-R in open source designs
The gallery holds 9 open source boards using the FT230XQ-R from 9 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 202 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is Capes by beagleboard.
Parts used alongside the FT230XQ-R
What boards using the FT230XQ-R are built for
FT230XQ-R: common questions
Where can I find a FT230XQ-R reference design?
Each of the 9 boards on this page is a real design using the FT230XQ-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the FT230XQ-R USBDP pin?
The USBDP pin has a series resistor on 8 of 9 designs, most often 27 Ω (then 33 Ω). Counted from the KiCad layouts of 9 open source designs using the FT230XQ-R.
What resistor goes on the FT230XQ-R USBDM pin?
The USBDM pin has a series resistor on 8 of 9 designs, most often 27 Ω (then 33 Ω). Counted from the KiCad layouts of 9 open source designs using the FT230XQ-R.
How is the FT230XQ-R VCCIO pin connected?
The VCCIO pin has a capacitor to GND on 7 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the FT230XQ-R.
Which microcontrollers do boards using the FT230XQ-R use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the FT230XQ-R?
The median is 100 × 90 mm, and 33% are two-layer designs.
What is the most popular open source board using the FT230XQ-R?
By GitHub stars, Capes by beagleboard, with 49 stars.
Can I simulate one of these boards using the FT230XQ-R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.