6 open source boards using the FUSB340TMX

Real designs built with the FUSB340TMX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the FUSB340TMX

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the FUSB340TMX connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The SSTX2+ pin has a series capacitor on 4 of 5 designs, most often 100 nF.
  • The SSTX2- pin has a series capacitor on 4 of 5 designs, most often 100 nF.
  • The SSTX1+ pin has a series capacitor on 4 of 5 designs, most often 100 nF.
SSTXCOM-pin 1Connected to: Signal 100%
  • Series capacitor on 40% · 100 nF (1)
SSTXCOM+pin 2Connected to: Signal 100%
  • Series capacitor on 40% · 100 nF (1)
GNDpin 3, 12, 18, 19Connected to: GND 100%
SSRXCOM-pin 4Connected to: Signal 100%
  • Series capacitor on 40% · 100 nF (1)
SSRXCOM+pin 5Connected to: Signal 100%
  • Series capacitor on 40% · 100 nF (1)
OEpin 7Connected to: GND 60% · a signal 40%
  • Pull-up to 3.3V on 40% · 12 kΩ (1), 100 kΩ (1)
SSTX2+pin 13Connected to: Signal 100%
  • Series capacitor on 80% · 100 nF (3)
SSTX2-pin 14Connected to: Signal 100%
  • Series capacitor on 80% · 100 nF (3)
SSTX1+pin 15Connected to: Signal 100%
  • Series capacitor on 80% · 100 nF (3)
SSTX1-pin 16Connected to: Signal 100%
  • Series capacitor on 80% · 100 nF (3)
VDDpin 17Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (3), 1 µF (2)
  • Ferrite bead on 40%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ReDIP-64 by daglem, TRNXSDR-carrier by acruxcz, BB3plus mainboard by eez-open and Picard by weiiwang01.

The FUSB340TMX in open source designs

The gallery holds 6 open source boards using the FUSB340TMX from 5 GitHub repositories; a typical one measures about 118.2 × 121.4 mm and carries around 288 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is ReDIP-64 by daglem.

Parts used alongside the FUSB340TMX

Microcontrollers on boards using the FUSB340TMX

FUSB340TMX: common questions

Where can I find a FUSB340TMX reference design?

Each of the 6 boards on this page is a real design using the FUSB340TMX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the FUSB340TMX VDD pin?

The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the FUSB340TMX.

How is the FUSB340TMX SSTX2+ pin connected?

The SSTX2+ pin has a series capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the FUSB340TMX.

How is the FUSB340TMX SSTX2- pin connected?

The SSTX2- pin has a series capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the FUSB340TMX.

Which microcontrollers do boards using the FUSB340TMX use?

Most are built on STM32 (5) and FPGA (1).

How big is a typical board using the FUSB340TMX?

The median is 118.2 × 121.4 mm, and 0% are two-layer designs.

What is the most popular open source board using the FUSB340TMX?

By GitHub stars, ReDIP-64 by daglem, with 20 stars.

Can I simulate one of these boards using the FUSB340TMX before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part