8 open source boards using the SN74LVC1G125DCKR
Real designs built with the SN74LVC1G125DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
TRNXSDR-carrier
acruxcz
91.8 × 139.8 mm702 parts6LCERN-OHL-S-2.015STM32
BB3plus mainboard
eez-open
233 × 230.5 mm353 parts4LTAPR-OHL-1.012FABulous board
FPGA-Research
101.2 × 63.5 mm75 parts4LApache-2.06ESP32
Soldered Inkplate 6 MOTION
SolderedElectronics
144.4 × 107.8 mm313 parts2LTAPR-OHL-1.04FPGA
Mosaic
bitbarista
20.3 × 51.4 mm51 parts4LCustom license3Fab-Drawing caravel dev v5-M.2
sdmay24-21
76.2 × 73.8 mm62 parts2LApache-2.01Gen 1 Hayabusa ECU
HasiKe
148 × 111.5 mm293 parts2LNo license0ESP32
Soldered Inkplate 6 MOTION panel
SolderedElectronics
144.4 × 221.6 mm313 parts2LTAPR-OHL-1.04
How designs wire the SN74LVC1G125DCKR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SN74LVC1G125DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The OE_1 pin has a pull-up to 3.3V on 4 of 7 designs, most often 10 kΩ.
- The VCC pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OE_1pin 1 | Connected to: The microcontroller 29%, FT232H 29%, SN74LVC1G125DCKR 29% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: 3.3V 86% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TRNXSDR-carrier by acruxcz, BB3plus mainboard by eez-open, FABulous board by FPGA-Research and Soldered Inkplate 6 MOTION by SolderedElectronics.
The SN74LVC1G125DCKR in open source designs
The gallery holds 8 open source boards using the SN74LVC1G125DCKR from 7 GitHub repositories; a typical one measures about 122.8 × 109.7 mm and carries around 303 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is TRNXSDR-carrier by acruxcz.
Parts used alongside the SN74LVC1G125DCKR
What boards using the SN74LVC1G125DCKR are built for
SN74LVC1G125DCKR: common questions
Where can I find a SN74LVC1G125DCKR reference design?
Each of the 8 boards on this page is a real design using the SN74LVC1G125DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the SN74LVC1G125DCKR OE_1 pin?
The OE_1 pin has a pull-up to 3.3V on 4 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the SN74LVC1G125DCKR.
What decoupling capacitors do designs use on the SN74LVC1G125DCKR VCC pin?
The VCC pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the SN74LVC1G125DCKR.
What parts are used alongside the SN74LVC1G125DCKR?
The FT232H, FUSB340TMX and MCP1319MT-29LE-OT appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G125DCKR use?
Most are built on ESP32 (2), STM32 (2) and FPGA (1).
How big is a typical board using the SN74LVC1G125DCKR?
The median is 122.8 × 109.7 mm, and 50% are two-layer designs.
What is the most popular open source board using the SN74LVC1G125DCKR?
By GitHub stars, TRNXSDR-carrier by acruxcz, with 15 stars.
Can I simulate one of these boards using the SN74LVC1G125DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.