12 open source boards using the GW1N-LV4QN88C6/I5
Real designs built with the GW1N-LV4QN88C6/I5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Aster-MCA
pulsefoundry
90 × 70 mm102 parts4LCERN-OHL-P-2.03FPGA
Amiga scandoubler v030wip
110-kenichi
95 × 95 mm139 parts4LNo license0FPGA
Amiga scandoubler analog
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler distribution
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler placement
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler pll top
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler refined
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler rgb out
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler routing
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler sync in
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler sync out
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Amiga scandoubler u2rot
110-kenichi
95 × 95 mm135 parts4LNo license0
The GW1N-LV4QN88C6/I5 in open source designs
The gallery holds 12 open source boards using the GW1N-LV4QN88C6/I5 from 2 GitHub repositories; a typical one measures about 95 × 95 mm and carries around 135 components.
100% use four copper layers or more, and 8% carry an open source license.
The most starred is Aster-MCA by pulsefoundry.
Microcontrollers on boards using the GW1N-LV4QN88C6/I5
What boards using the GW1N-LV4QN88C6/I5 are built for
GW1N-LV4QN88C6/I5: common questions
Where can I find a GW1N-LV4QN88C6/I5 reference design?
Each of the 12 boards on this page is a real design using the GW1N-LV4QN88C6/I5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the GW1N-LV4QN88C6/I5 use?
Most are built on FPGA (11) and RP2040/RP2350 (1).
How big is a typical board using the GW1N-LV4QN88C6/I5?
The median is 95 × 95 mm, and 0% are two-layer designs.
What is the most popular open source board using the GW1N-LV4QN88C6/I5?
By GitHub stars, Aster-MCA by pulsefoundry, with 3 stars.
Can I simulate one of these boards using the GW1N-LV4QN88C6/I5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.