6 open source boards using the HT16K33
Real designs built with the HT16K33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
LargeWordClock
LikeClockwork
398.2 × 398.2 mm579 parts2LMIT67seg htk16k33
llegoff
50 × 67 mm40 parts2LCERN-OHL-1.20Karabas mini shield
andykarpov
70 × 69.8 mm33 parts2LCC-BY-NC-4.01AVR/Arduino
Module base
PurkkaKoodari
100 × 100 mm29 parts2LMIT2AVR/Arduino
Timer
PurkkaKoodari
100 × 100 mm18 parts2LMIT2ESP32
Dash
sufst
235 × 73.6 mm63 parts2LGPL-3.019
How designs wire the HT16K33
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the HT16K33 connects to, and the resistors, capacitors and other passives placed on it.
- The SCL_26 pin has a pull-up to VCC on 3 of 4 designs, most often 10 kΩ (then 4.7 kΩ).
- The SDA_27 pin has a pull-up to VCC on 3 of 4 designs, most often 10 kΩ (then 4.7 kΩ).
- The VDD_28 pin has a decoupling capacitor on 3 of 4 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 1 | Connected to: GND 80% · a signal 20% | — |
| SCL_26pin 26 | Connected to: The microcontroller 50%, a connector 50% |
|
| SDA_27pin 27 | Connected to: The microcontroller 50%, a connector 50% |
|
| VDD_28pin 28 | Connected to: VCC 75% · a signal 25% |
|
24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dash-PCB by sufst, LargeWordClock by LikeClockwork, Module base by PurkkaKoodari and Karabas mini shield by andykarpov.
The HT16K33 in open source designs
The gallery holds 6 open source boards using the HT16K33 from 5 GitHub repositories; a typical one measures about 100 × 86.8 mm and carries around 37 components.
100% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Dash-PCB by sufst.
Microcontrollers on boards using the HT16K33
What boards using the HT16K33 are built for
HT16K33: common questions
Where can I find a HT16K33 reference design?
Each of the 6 boards on this page is a real design using the HT16K33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the HT16K33 SCL_26 pin?
The SCL_26 pin has a pull-up to VCC on 3 of 4 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the HT16K33.
What pull-up resistor is used on the HT16K33 SDA_27 pin?
The SDA_27 pin has a pull-up to VCC on 3 of 4 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the HT16K33.
What decoupling capacitors do designs use on the HT16K33 VDD_28 pin?
The VDD_28 pin has a decoupling capacitor on 3 of 4 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the HT16K33.
Which microcontrollers do boards using the HT16K33 use?
Most are built on AVR/Arduino (3) and ESP32 (1).
How big is a typical board using the HT16K33?
The median is 100 × 86.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the HT16K33?
By GitHub stars, Dash-PCB by sufst, with 19 stars.
Can I simulate one of these boards using the HT16K33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.