6 open source boards using the INA226AIDGST

Real designs built with the INA226AIDGST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the INA226AIDGST

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the INA226AIDGST connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ (then 5 kΩ).
  • The SCL pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ (then 5 kΩ).
  • The VS pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF).
  • The VBUS pin has a series resistor on 3 of 4 designs, most often 10 Ω (then 100 mΩ).
A1pin 1Connected to: GND 60% · a signal 40%
  • Pull-up to 3.3V on 40% · 100 Ω (1), 2.2 kΩ (1)
A0pin 2Connected to: GND 60% · 3.3V 20% · a signal 20%
ALERTpin 3Connected to: Not connected 60% · a signal 40%
SDApin 4Connected to: INA226AIDGST 40% · GND 20%
  • Pull-up to 3.3V on 80% · 4.7 kΩ (3), 5 kΩ (1)
SCLpin 5Connected to: INA226AIDGST 40% · 3.3V 20%
  • Pull-up to 3.3V on 80% · 4.7 kΩ (3), 5 kΩ (1)
VSpin 6Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (4), 1 µF (2), 4.7 µF (1)
GNDpin 7Connected to: GND 100%
VBUSpin 8Connected to: Signal 75% · VBUS_FLATSAT 25%
  • Series resistor on 75% · 10 Ω (1), 100 mΩ (1), 2 mΩ (1)
VIN-pin 9Connected to: A connector 50%
  • Series resistor on 75% · 10 Ω (1), 100 mΩ (1), 2 mΩ (1)
VIN+pin 10Connected to: Signal 75% · VBUS_FLATSAT 25%
  • Series resistor on 75% · 10 Ω (1), 100 mΩ (1), 2 mΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OreSat Solar Module - GaAs + MCXN by oresat, Oresat helmholtz by oresat, OreSat C3 Proxy Board by oresat and RP2040-Dual-TypeC-eMMC-Board by gorkemguven.

The INA226AIDGST in open source designs

The gallery holds 6 open source boards using the INA226AIDGST from 5 GitHub repositories; a typical one measures about 71.2 × 61.1 mm and carries around 74 components.

67% use four copper layers or more, and 17% carry an open source license.

The most starred is OreSat Solar Module - Silicon Cells + MCXN by oresat.

Microcontrollers on boards using the INA226AIDGST

What boards using the INA226AIDGST are built for

INA226AIDGST: common questions

Where can I find a INA226AIDGST reference design?

Each of the 6 boards on this page is a real design using the INA226AIDGST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the INA226AIDGST SDA pin?

The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ (then 5 kΩ). Counted from the KiCad layouts of 5 open source designs using the INA226AIDGST.

What pull-up resistor is used on the INA226AIDGST SCL pin?

The SCL pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ (then 5 kΩ). Counted from the KiCad layouts of 5 open source designs using the INA226AIDGST.

What decoupling capacitors do designs use on the INA226AIDGST VS pin?

The VS pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the INA226AIDGST.

Which microcontrollers do boards using the INA226AIDGST use?

Most are built on RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the INA226AIDGST?

The median is 71.2 × 61.1 mm, and 33% are two-layer designs.

What is the most popular open source board using the INA226AIDGST?

By GitHub stars, OreSat Solar Module - Silicon Cells + MCXN by oresat, with 25 stars.

Can I simulate one of these boards using the INA226AIDGST before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part