8 open source boards using the INA3221AIRGVR
Real designs built with the INA3221AIRGVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ducker-Charger
Angelussss
66.4 × 163.6 mm256 parts4LCC-BY-NC-4.018NXP
R1000AX
pluggee
175 × 68.5 mm138 parts4LGPL-3.015WCH CH32/CH55x
MinyasX-Combined
kunichiko
129 × 121 mm187 parts4LMIT2STM32
NoNameComputer-2.0
PlanAndBuild
40 × 100 mm107 parts4LNo license2ESP32
Pet climate control
Yuan-Quan
217.2 × 95.3 mm218 parts2LNo license0PIC
Master
coloradocube
96 × 90 mm76 parts2LNo license0RP2040/RP2350
Solardeck
lorecrafting
222 × 160 mm36 parts6LCustom license0WCH CH32/CH55x
Minyas-X
kunichiko
129 × 100 mm172 parts4LMIT2
How designs wire the INA3221AIRGVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the INA3221AIRGVR connects to, and the resistors, capacitors and other passives placed on it.
- The SCL pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The SDA pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The CRITICAL_9 pin is left unconnected on 5 of 6 designs.
- The A0 pin is tied to GND on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN-3pin 1 | Connected to: Signal 50% · not connected 17% · GND 17% · 5V 17% |
|
| IN+3pin 2 | Connected to: Signal 50% · not connected 17% · GND 17% · 5V 17% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| VSpin 4 | Connected to: 3.3V 100% |
|
| A0pin 5 | Connected to: GND 67% · a signal 33% | — |
| SCLpin 6 | Connected to: The microcontroller 67%, a connector 33% |
|
| SDApin 7 | Connected to: The microcontroller 67%, a connector 33% |
|
| WARNING_8pin 8 | Connected to: Not connected 67% · a signal 33% | — |
| CRITICAL_9pin 9 | Connected to: Not connected 83% · a signal 17% | — |
| PVpin 10 | Connected to: Signal 67% · not connected 33% |
|
| IN-1pin 11 | Connected to: Signal 83% · VBUS 17% |
|
| IN+1pin 12 | Connected to: Signal 67% · 5V 33% |
|
| TCpin 13 | Connected to: Not connected 50% · a signal 50% |
|
| IN-2pin 14 | Connected to: Signal 83% · 12V 17% |
|
| VPUpin 16 | Connected to: 3.3V 50% · not connected 17% · a signal 33% |
|
| EP_17pin 17 | Connected to: GND 83% · not connected 17% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ducker-Charger by Angelussss, R1000AX by pluggee, MinyasX-Combined by kunichiko and NoNameComputer-2.0 by PlanAndBuild.
The INA3221AIRGVR in open source designs
The gallery holds 8 open source boards using the INA3221AIRGVR from 7 GitHub repositories; a typical one measures about 129 × 100 mm and carries around 155 components.
75% use four copper layers or more, and 38% carry an open source license.
The most starred is Ducker-Charger by Angelussss.
Microcontrollers on boards using the INA3221AIRGVR
What boards using the INA3221AIRGVR are built for
INA3221AIRGVR: common questions
Where can I find a INA3221AIRGVR reference design?
Each of the 8 boards on this page is a real design using the INA3221AIRGVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the INA3221AIRGVR SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 6 open source designs using the INA3221AIRGVR.
What pull-up resistor is used on the INA3221AIRGVR SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 6 open source designs using the INA3221AIRGVR.
How is the INA3221AIRGVR CRITICAL_9 pin connected?
The CRITICAL_9 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the INA3221AIRGVR.
Which microcontrollers do boards using the INA3221AIRGVR use?
Most are built on WCH CH32/CH55x (2), STM32 (2), ESP32 (1) and NXP (1).
How big is a typical board using the INA3221AIRGVR?
The median is 129 × 100 mm, and 25% are two-layer designs.
What is the most popular open source board using the INA3221AIRGVR?
By GitHub stars, Ducker-Charger by Angelussss, with 18 stars.
Can I simulate one of these boards using the INA3221AIRGVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.