3 open source boards using the KSZ8081RNACA (same as on the v0.6)
Real designs built with the KSZ8081RNACA (same as on the v0.6), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAMDuet3 MB 6HC
Duet3D
134 × 140 mm652 parts4LCustom license50
Microchip SAMDuet3-Mainboard-6XD
115 × 140 mm467 parts4LCustom license6
Microchip SAMDuet3 MB 6HC
ReadHeadRedemption
134 × 140 mm652 parts4LNo license0
The KSZ8081RNACA (same as on the v0.6) in open source designs
The gallery holds 3 open source boards using the KSZ8081RNACA (same as on the v0.6) from 3 GitHub repositories; a typical one measures about 134 × 140 mm and carries around 652 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Duet3 MB 6HC by Duet3D.
Parts used alongside the KSZ8081RNACA (same as on the v0.6)
Microcontrollers on boards using the KSZ8081RNACA (same as on the v0.6)
What boards using the KSZ8081RNACA (same as on the v0.6) are built for
KSZ8081RNACA (same as on the v0.6): common questions
Where can I find a KSZ8081RNACA (same as on the v0.6) reference design?
Each of the 3 boards on this page is a real design using the KSZ8081RNACA (same as on the v0.6). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the KSZ8081RNACA (same as on the v0.6)?
The 74HCT2G34GW,125, 74LVC2G34GW,125, AP22816AKEWT, AP7361C-33E-13 and CM1624−08DE appear in the most repositories here.
Which microcontrollers do boards using the KSZ8081RNACA (same as on the v0.6) use?
Most are built on Microchip SAM (3).
How big is a typical board using the KSZ8081RNACA (same as on the v0.6)?
The median is 134 × 140 mm, and 0% are two-layer designs.
What is the most popular open source board using the KSZ8081RNACA (same as on the v0.6)?
By GitHub stars, Duet3 MB 6HC by Duet3D, with 50 stars.
Can I simulate one of these boards using the KSZ8081RNACA (same as on the v0.6) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.