4 open source boards using the LAN8710A-EZC-TR

Real designs built with the LAN8710A-EZC-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The LAN8710A-EZC-TR in open source designs

The gallery holds 4 open source boards using the LAN8710A-EZC-TR from 2 GitHub repositories; a typical one measures about 118 × 67.8 mm and carries around 295 components.

75% use four copper layers or more, and 0% carry an open source license.

The most starred is Eumesmo 24V 16xIn/16xOut/1-Wire Module by thermseekr.

Parts used alongside the LAN8710A-EZC-TR

Microcontrollers on boards using the LAN8710A-EZC-TR

What boards using the LAN8710A-EZC-TR are built for

LAN8710A-EZC-TR: common questions

Where can I find a LAN8710A-EZC-TR reference design?

Each of the 4 boards on this page is a real design using the LAN8710A-EZC-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LAN8710A-EZC-TR?

The CH340K, ESP32-WROOM-32UE-N16, SY8089A1AAC and TX4138 appear in the most repositories here.

Which microcontrollers do boards using the LAN8710A-EZC-TR use?

Most are built on ESP32 (4).

How big is a typical board using the LAN8710A-EZC-TR?

The median is 118 × 67.8 mm, and 25% are two-layer designs.

What is the most popular open source board using the LAN8710A-EZC-TR?

By GitHub stars, Eumesmo 24V 16xIn/16xOut/1-Wire Module by thermseekr, with 6 stars.

Can I simulate one of these boards using the LAN8710A-EZC-TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part