5 open source boards using the LD1117STR

Real designs built with the LD1117STR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LD1117STR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LD1117STR connects to, and the resistors, capacitors and other passives placed on it.

  • The GND pin has a resistor to GND on 3 of 5 designs, most often 1.6 kΩ (then 649 Ω).
  • The GND pin has a pull-up to 3.3V on 3 of 5 designs, most often 1 kΩ (then 120 Ω).
  • The VI pin has a decoupling capacitor on 3 of 5 designs, most often 10 µF (then 100 nF).
  • The GND pin has a series resistor on 2 of 5 designs, most often 120 Ω (then 100 Ω).
GNDpin 1Connected to: Signal 80% · 10V 20%
  • Resistor to GND on 60% · 1.6 kΩ (1), 649 Ω (1)
  • Pull-up to 3.3V on 60% · 1 kΩ (1), 120 Ω (1)
  • Series resistor on 40% · 120 Ω (1), 100 Ω (1)
  • Capacitor to GND on 40% · 10 µF (1)
VOpin 2Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 40% · 10 µF (3), 100 nF (1)
VIpin 3Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 60% · 10 µF (3), 100 nF (3)
TABpin 4Connected to: VCCINT 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Midi grid by zukaitis, Telemaque by f5bmi, Homebrew 65c02 Computer by snorklerjoe and CW312T-MPC5676R by jmercerr.

The LD1117STR in open source designs

The gallery holds 5 open source boards using the LD1117STR from 5 GitHub repositories; a typical one measures about 100 × 98 mm and carries around 90 components.

60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Midi grid by zukaitis.

Microcontrollers on boards using the LD1117STR

What boards using the LD1117STR are built for

LD1117STR: common questions

Where can I find a LD1117STR reference design?

Each of the 5 boards on this page is a real design using the LD1117STR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LD1117STR GND pin?

The GND pin has a resistor to GND on 3 of 5 designs, most often 1.6 kΩ (then 649 Ω). Counted from the KiCad layouts of 5 open source designs using the LD1117STR.

What decoupling capacitors do designs use on the LD1117STR VI pin?

The VI pin has a decoupling capacitor on 3 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the LD1117STR.

What decoupling capacitors do designs use on the LD1117STR VO pin?

The VO pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the LD1117STR.

Which microcontrollers do boards using the LD1117STR use?

Most are built on ESP32 (1), PIC (1) and STM32 (1).

How big is a typical board using the LD1117STR?

The median is 100 × 98 mm, and 60% are two-layer designs.

What is the most popular open source board using the LD1117STR?

By GitHub stars, Midi grid by zukaitis, with 92 stars.

Can I simulate one of these boards using the LD1117STR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part