3 open source boards using the LE33CZ

Real designs built with the LE33CZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LE33CZ in open source designs

The gallery holds 3 open source boards using the LE33CZ from 3 GitHub repositories; a typical one measures about 100 × 97 mm and carries around 81 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Rgb to hdmi by hoglet67.

Microcontrollers on boards using the LE33CZ

What boards using the LE33CZ are built for

LE33CZ: common questions

Where can I find a LE33CZ reference design?

Each of the 3 boards on this page is a real design using the LE33CZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LE33CZ use?

Most are built on AVR/Arduino (2).

How big is a typical board using the LE33CZ?

The median is 100 × 97 mm, and 100% are two-layer designs.

What is the most popular open source board using the LE33CZ?

By GitHub stars, Rgb to hdmi by hoglet67, with 1,024 stars.

Can I simulate one of these boards using the LE33CZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part