3 open source boards using the LIS3DHTR_C15134
Real designs built with the LIS3DHTR_C15134, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Wakeboard
alexspurling
33.6 × 56.4 mm32 parts2LNo license21ESP32
Wristwearable
wlatif-cmyk
22.4 × 32.2 mm39 parts4LNo license8ESP32
Tiny2048
thip
50 × 50 mm51 parts2LCC-BY-NC-4.04
The LIS3DHTR_C15134 in open source designs
The gallery holds 3 open source boards using the LIS3DHTR_C15134 from 3 GitHub repositories; a typical one measures about 33.6 × 50 mm and carries around 39 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Wakeboard by alexspurling.
Parts used alongside the LIS3DHTR_C15134
Microcontrollers on boards using the LIS3DHTR_C15134
What boards using the LIS3DHTR_C15134 are built for
LIS3DHTR_C15134: common questions
Where can I find a LIS3DHTR_C15134 reference design?
Each of the 3 boards on this page is a real design using the LIS3DHTR_C15134. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LIS3DHTR_C15134 use?
Most are built on ESP32 (3).
How big is a typical board using the LIS3DHTR_C15134?
The median is 33.6 × 50 mm, and 67% are two-layer designs.
What is the most popular open source board using the LIS3DHTR_C15134?
By GitHub stars, Wakeboard by alexspurling, with 21 stars.
Can I simulate one of these boards using the LIS3DHTR_C15134 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.