3 open source boards using the LIS3DSHTR
Real designs built with the LIS3DSHTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Meshthingy
luthfai
71 × 46 mm76 parts2LNo license0ESP32
Meshtastic v0
luthfai
71 × 46 mm74 parts2LNo license0ESP32
Meshtastic v0-rounded
luthfai
71 × 46 mm71 parts2LNo license0
The LIS3DSHTR in open source designs
The gallery holds 3 open source boards using the LIS3DSHTR from 2 GitHub repositories; a typical one measures about 71 × 46 mm and carries around 74 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Meshthingy by luthfai.
Parts used alongside the LIS3DSHTR
Microcontrollers on boards using the LIS3DSHTR
What boards using the LIS3DSHTR are built for
LIS3DSHTR: common questions
Where can I find a LIS3DSHTR reference design?
Each of the 3 boards on this page is a real design using the LIS3DSHTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LIS3DSHTR?
The BME280, DM-OLED096-636, ESP32-S3-WROOM-1 and TPS62046DGQR appear in the most repositories here.
Which microcontrollers do boards using the LIS3DSHTR use?
Most are built on ESP32 (3).
How big is a typical board using the LIS3DSHTR?
The median is 71 × 46 mm, and 100% are two-layer designs.
What is the most popular open source board using the LIS3DSHTR?
By GitHub stars, Meshthingy by luthfai, with 0 stars.
Can I simulate one of these boards using the LIS3DSHTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.