3 open source boards using the LM25011MY/NOPB

Real designs built with the LM25011MY/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LM25011MY/NOPB in open source designs

The gallery holds 3 open source boards using the LM25011MY/NOPB from 3 GitHub repositories; a typical one measures about 105 × 70 mm and carries around 350 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Buddy board-MINI-PCB by prusa3d.

Microcontrollers on boards using the LM25011MY/NOPB

What boards using the LM25011MY/NOPB are built for

LM25011MY/NOPB: common questions

Where can I find a LM25011MY/NOPB reference design?

Each of the 3 boards on this page is a real design using the LM25011MY/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LM25011MY/NOPB?

The ST25DV64K, TMC2209-LA, AHCT125, DT1140-04LP and LAN8742A-CZ-TR appear in the most repositories here.

Which microcontrollers do boards using the LM25011MY/NOPB use?

Most are built on STM32 (3).

How big is a typical board using the LM25011MY/NOPB?

The median is 105 × 70 mm, and 0% are two-layer designs.

What is the most popular open source board using the LM25011MY/NOPB?

By GitHub stars, Buddy board-MINI-PCB by prusa3d, with 64 stars.

Can I simulate one of these boards using the LM25011MY/NOPB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part