4 open source boards using the LM2594M-5.0
Real designs built with the LM2594M-5.0, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Spha btni hardware
sillevl
103 × 86.5 mm112 parts2LNo license0
STM32Spha rel12-hardware
207.5 × 86.5 mm89 parts2LNo license0
Raspberry PiSpha gateway hardware
68 × 87 mm75 parts4LNo license0
STM32Spha rel6-hardware
103 × 86.5 mm70 parts2LNo license0
The LM2594M-5.0 in open source designs
The gallery holds 4 open source boards using the LM2594M-5.0 from 4 GitHub repositories; a typical one measures about 103 × 86.5 mm and carries around 82 components.
75% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Spha btni hardware by sillevl.
Parts used alongside the LM2594M-5.0
Microcontrollers on boards using the LM2594M-5.0
LM2594M-5.0: common questions
Where can I find a LM2594M-5.0 reference design?
Each of the 4 boards on this page is a real design using the LM2594M-5.0. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LM2594M-5.0?
The PESD2CAN, SN65HVD230, AT24CS32-STUM, MCP1825S and STM32L432KCUx appear in the most repositories here.
Which microcontrollers do boards using the LM2594M-5.0 use?
Most are built on STM32 (3) and Raspberry Pi (1).
How big is a typical board using the LM2594M-5.0?
The median is 103 × 86.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the LM2594M-5.0?
By GitHub stars, Spha btni hardware by sillevl, with 0 stars.
Can I simulate one of these boards using the LM2594M-5.0 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.