12 open source boards using the LM2596S-12V

Real designs built with the LM2596S-12V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

The LM2596S-12V in open source designs

The gallery holds 12 open source boards using the LM2596S-12V from 2 GitHub repositories; a typical one measures about 107.2 × 90.7 mm and carries around 73 components.

75% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Smart Hybrid IOT energy management System by jsitech4.

Parts used alongside the LM2596S-12V

Microcontrollers on boards using the LM2596S-12V

What boards using the LM2596S-12V are built for

LM2596S-12V: common questions

Where can I find a LM2596S-12V reference design?

Each of the 12 boards on this page is a real design using the LM2596S-12V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM2596S-12V use?

Most are built on ESP32 (11) and AVR/Arduino (1).

How big is a typical board using the LM2596S-12V?

The median is 107.2 × 90.7 mm, and 75% are two-layer designs.

What is the most popular open source board using the LM2596S-12V?

By GitHub stars, Smart Hybrid IOT energy management System by jsitech4, with 0 stars.

Can I simulate one of these boards using the LM2596S-12V before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part