5 open source boards using the LM337T
Real designs built with the LM337T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
BenchBudEE
ContextualElectronics
165.1 × 63.5 mm157 parts2LMIT16PIC
6ch af preamplifier
dilshan
151.3 × 50.8 mm115 parts2LMIT12Precision-Voltage-Reference
agaelema
84 × 69.5 mm60 parts2LMIT7Fuente lineal regulable
N4ch0VS
95.2 × 111.9 mm61 parts2LNo license0Plus minus 12v
jonronen
128.3 × 47.6 mm28 parts2LNo license1
How designs wire the LM337T
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM337T connects to, and the resistors, capacitors and other passives placed on it.
- The ADJ_1 pin has a series resistor on 4 of 5 designs, most often 715 Ω (then 470 Ω).
- The ADJ_1 pin has a resistor to GND on 3 of 5 designs, most often 5 kΩ (then 1 kΩ).
- The VO_2 pin has a series resistor on 3 of 5 designs, most often 2.2 kΩ (then 4.7 Ω).
- The VI_3 pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ADJ_1pin 1 | Connected to: Signal 100% |
|
| VO_2pin 2 | Connected to: Signal 60% · -12V 40% |
|
| VI_3pin 3 | Connected to: A connector 40% · -5V 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BenchBudEE by ContextualElectronics, 6ch af preamplifier by dilshan, Precision-Voltage-Reference by agaelema and Plus minus 12v by jonronen.
The LM337T in open source designs
The gallery holds 5 open source boards using the LM337T from 5 GitHub repositories; a typical one measures about 128.3 × 63.5 mm and carries around 61 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is BenchBudEE by ContextualElectronics.
Parts used alongside the LM337T
Microcontrollers on boards using the LM337T
What boards using the LM337T are built for
LM337T: common questions
Where can I find a LM337T reference design?
Each of the 5 boards on this page is a real design using the LM337T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LM337T ADJ_1 pin?
The ADJ_1 pin has a series resistor on 4 of 5 designs, most often 715 Ω (then 470 Ω). Counted from the KiCad layouts of 5 open source designs using the LM337T.
What resistor goes on the LM337T VO_2 pin?
The VO_2 pin has a series resistor on 3 of 5 designs, most often 2.2 kΩ (then 4.7 Ω). Counted from the KiCad layouts of 5 open source designs using the LM337T.
How is the LM337T VI_3 pin connected?
The VI_3 pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the LM337T.
Which microcontrollers do boards using the LM337T use?
Most are built on AVR/Arduino (1) and PIC (1).
How big is a typical board using the LM337T?
The median is 128.3 × 63.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM337T?
By GitHub stars, BenchBudEE by ContextualElectronics, with 16 stars.
Can I simulate one of these boards using the LM337T before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.