7 open source boards using the LM3914N
Real designs built with the LM3914N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SW-Meter
wodowiesel
53 × 66 mm16 parts2LCERN-OHL-W-2.06BMS SCHOOL
mirkoj-boop
136.4 × 85.6 mm80 parts2LNo license0Recyclobot
jeff4444
49.5 × 48 mm19 parts2LNo license0- schematic only · 78 parts
Mezclador de-4-canales y-Amplificador de-3W
ExeMagni
78 partsNo license0 - schematic only · 15 parts
Audio balance indicator
AndacUnal1
15 partsNo license0 Planta Barra Ledss
jesuscuadrul2
58.1 × 35.8 mm9 parts2LNo license1Led batery indicator
baleshwarece-jpg
80 × 20 mm12 parts2LNo license0
How designs wire the LM3914N
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM3914N connects to, and the resistors, capacitors and other passives placed on it.
- The V- pin is tied to GND on 4 of 5 designs.
- The RLO pin is tied to GND on 4 of 5 designs.
- The V+ pin has a decoupling capacitor on 2 of 5 designs, most often 22 µF (then 100 nF).
- The SIG pin has a series resistor on 2 of 5 designs, most often 4.7 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| V-pin 2 | Connected to: GND 80% · a signal 20% | — |
| V+pin 3 | Connected to: 9V 80% · a signal 20% |
|
| RLOpin 4 | Connected to: GND 80% · a signal 20% | — |
| SIGpin 5 | Connected to: A connector 40% · VCC 20% |
|
| RHIpin 6 | Connected to: Signal 100% |
|
| REFOUTpin 7 | Connected to: Signal 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SW-Meter by wodowiesel, Planta Barra Ledss by jesuscuadrul2, Led batery indicator by baleshwarece-jpg and Recyclobot by jeff4444.
The LM3914N in open source designs
The gallery holds 7 open source boards using the LM3914N from 7 GitHub repositories; a typical one measures about 58.1 × 48 mm and carries around 16 components.
100% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is SW-Meter by wodowiesel.
What boards using the LM3914N are built for
LM3914N: common questions
Where can I find a LM3914N reference design?
Each of the 7 boards on this page is a real design using the LM3914N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM3914N V- pin connected?
The V- pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LM3914N.
How is the LM3914N RLO pin connected?
The RLO pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LM3914N.
What decoupling capacitors do designs use on the LM3914N V+ pin?
The V+ pin has a decoupling capacitor on 2 of 5 designs, most often 22 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the LM3914N.
How big is a typical board using the LM3914N?
The median is 58.1 × 48 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM3914N?
By GitHub stars, SW-Meter by wodowiesel, with 6 stars.
Can I simulate one of these boards using the LM3914N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.