7 open source boards using the LM4040

Real designs built with the LM4040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the LM4040

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM4040 connects to, and the resistors, capacitors and other passives placed on it.

  • The A pin is tied to GND on 3 of 5 designs (a signal on 2).
  • Pin 3 is left unconnected on 3 of 4 designs.
Apin 2Connected to: GND 60% · a signal 40%
Pin 3Connected to: Not connected 75% · GND 25%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Eurorack 4XVCA Module by Len42, 6xUSB PowMet by aleksejm, DaisyDelayHardware by fablabnk and Server lader by ep092.

The LM4040 in open source designs

The gallery holds 7 open source boards using the LM4040 from 6 GitHub repositories; a typical one measures about 71.4 × 103.6 mm and carries around 98 components.

86% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.

The most starred is Eurorack 4XVCA Module by Len42.

Parts used alongside the LM4040

Microcontrollers on boards using the LM4040

What boards using the LM4040 are built for

LM4040: common questions

Where can I find a LM4040 reference design?

Each of the 7 boards on this page is a real design using the LM4040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM4040 A pin connected?

The A pin is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the LM4040.

How is the LM4040 pin 3 connected?

Pin 3 is left unconnected on 3 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the LM4040.

Which microcontrollers do boards using the LM4040 use?

Most are built on AVR/Arduino (1), ESP8266 (1) and STM32 (1).

How big is a typical board using the LM4040?

The median is 71.4 × 103.6 mm, and 86% are two-layer designs.

What is the most popular open source board using the LM4040?

By GitHub stars, Eurorack 4XVCA Module by Len42, with 50 stars.

Can I simulate one of these boards using the LM4040 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part