5 open source boards using the LMZ21700SILR
Real designs built with the LMZ21700SILR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
WiFi-Septic-Controller
mikelawrence
80 × 90 mm99 parts2LMIT8Microchip SAM
WiFi-Gate-Controller
mikelawrence
66 × 51.5 mm86 parts2LMIT8RPi pHat-Thermocouple
mikelawrence
65 × 30 mm54 parts2LMIT7STM32
Interface board
BetzDrive
70 × 70 mm126 parts4LCERN-OHL-P-2.05Microchip SAM
WiFi-Gate-Control-Board
mikelawrence
139.7 × 158.8 mm252 parts4LNo license3
How designs wire the LMZ21700SILR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LMZ21700SILR connects to, and the resistors, capacitors and other passives placed on it.
- The SS pin has a capacitor to GND on 5 of 5 designs, most often 3.3 nF (then 4.7 nF).
- The FB pin has a resistor to GND on 5 of 5 designs, most often 383 kΩ (then 44.2 kΩ).
- The FB pin has a pull-up to 3.3V on 5 of 5 designs, most often 1.21 MΩ (then 232 kΩ).
- The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 22 µF (then 47 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SSpin 1 | Connected to: Signal 100% |
|
| FBpin 2 | Connected to: Signal 100% |
|
| PGpin 3 | Connected to: Not connected 100% | — |
| VOUTpin 4 | Connected to: 3.3V 100% |
|
| GNDpin 5 | Connected to: GND 100% | — |
| VOSpin 6 | Connected to: 3.3V 100% |
|
| ENpin 7 | Connected to: Signal 80% · 12V 20% |
|
| VINpin 8 | Connected to: Signal 80% · 12V 20% |
|
| PADpin 9 | Connected to: GND 100% | — |
| Pin 10 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include WiFi-Gate-Controller by mikelawrence, WiFi-Septic-Controller by mikelawrence, RPi pHat-Thermocouple by mikelawrence and Interface board by BetzDrive.
The LMZ21700SILR in open source designs
The gallery holds 5 open source boards using the LMZ21700SILR from 5 GitHub repositories; a typical one measures about 70 × 70 mm and carries around 99 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is WiFi-Septic-Controller by mikelawrence.
Parts used alongside the LMZ21700SILR
Microcontrollers on boards using the LMZ21700SILR
What boards using the LMZ21700SILR are built for
LMZ21700SILR: common questions
Where can I find a LMZ21700SILR reference design?
Each of the 5 boards on this page is a real design using the LMZ21700SILR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LMZ21700SILR SS pin connected?
The SS pin has a capacitor to GND on 5 of 5 designs, most often 3.3 nF (then 4.7 nF). Counted from the KiCad layouts of 5 open source designs using the LMZ21700SILR.
What resistor goes on the LMZ21700SILR FB pin?
The FB pin has a resistor to GND on 5 of 5 designs, most often 383 kΩ (then 44.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the LMZ21700SILR.
What decoupling capacitors do designs use on the LMZ21700SILR VOUT pin?
The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 22 µF (then 47 µF). Counted from the KiCad layouts of 5 open source designs using the LMZ21700SILR.
What parts are used alongside the LMZ21700SILR?
The ATSAMD21G18A-MUT, ATWINC1500-MR210UB1140 and SN74LVC2G14DBVG4 appear in the most repositories here.
Which microcontrollers do boards using the LMZ21700SILR use?
Most are built on Microchip SAM (3) and STM32 (1).
How big is a typical board using the LMZ21700SILR?
The median is 70 × 70 mm, and 60% are two-layer designs.
What is the most popular open source board using the LMZ21700SILR?
By GitHub stars, WiFi-Septic-Controller by mikelawrence, with 8 stars.
Can I simulate one of these boards using the LMZ21700SILR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.