16 open source boards using the LR1121

Real designs built with the LR1121, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the LR1121

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the LR1121 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a capacitor to GND on 15 of 15 designs.
  • Pin 1 has a inductor on 15 of 15 designs.
  • Pin 1 has a series resistor on 15 of 15 designs.
  • Pin 2 is tied to VDD_RF on 15 of 15 designs.
Pin 1Connected to: Signal 100%
  • Capacitor to GND on 100%
  • Inductor on 100%
  • Series resistor on 100%
Pin 2Connected to: VDD_RF 100%
  • Decoupling capacitor on 100%
Pin 3Connected to: Signal 100%
  • Capacitor to GND on 100%
  • Ferrite bead on 100%
Pin 4Connected to: Signal 100%
  • Series resistor on 100%
Pin 5Connected to: Not connected 100%
Pin 6Connected to: TMP-881 100%
  • Capacitor to GND on 100%
  • Pull-up to VDD_RF on 100%
Pin 7Connected to: Signal 100%
  • Capacitor to GND on 100%
  • Crystal on 100%
Pin 8Connected to: Signal 100%
  • Capacitor to GND on 100%
  • Crystal on 100%
Pin 11Connected to: Signal 100%
  • Series resistor on 100%
Pin 12Connected to: Signal 100%
  • Inductor on 100%
  • Capacitor to GND on 100%
Pin 13Connected to: GND 100%
Pin 14Connected to: Signal 100%
  • Inductor on 100%
Pin 15Connected to: VDD_RF 100%
  • Decoupling capacitor on 100%
Pin 16Connected to: Not connected 100%
Pin 17Connected to: Not connected 100%
Pin 18Connected to: Not connected 100%
Pin 19Connected to: Signal 100%
  • Series resistor on 100%
Pin 20Connected to: Signal 100%
  • Series resistor on 100%
Pin 26Connected to: Signal 100%
  • Capacitor to GND on 100%
  • Inductor on 100%
Pin 27Connected to: Not connected 100%
Pin 28Connected to: Not connected 100%
Pin 29Connected to: Signal 100%
  • Inductor on 100%
  • Capacitor to GND on 100%
Pin 30Connected to: Signal 100%
  • Series capacitor on 100%
  • Inductor on 100%
Pin 31Connected to: Signal 100%
  • Inductor on 100%
  • Series capacitor on 100%
Pin 32Connected to: Signal 100%
  • Series resistor on 100%
  • Inductor on 100%
  • Series capacitor on 100%
Pin 33Connected to: GND 100%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wio LR1121 Module v0.9 by Josephrp, Wio LR1121 Module v0.9 by dhirptl, Wio LR1121 Module v0.9 by Videocraft10 and Wio LR1121 Module v0.9 by feastorg.

The LR1121 in open source designs

The gallery holds 16 open source boards using the LR1121 from 16 GitHub repositories; a typical one measures about 17 × 12 mm and carries around 69 components.

100% use four copper layers or more, and 31% carry an open source license.

The most starred is Wio LR1121 Module v0.9 by Josephrp.

Parts used alongside the LR1121

LR1121: common questions

Where can I find a LR1121 reference design?

Each of the 16 boards on this page is a real design using the LR1121. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LR1121 pin 1 connected?

Pin 1 has a capacitor to GND on 15 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the LR1121.

How is the LR1121 pin 2 connected?

Pin 2 is tied to VDD_RF on 15 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the LR1121.

How is the LR1121 pin 3 connected?

Pin 3 has a capacitor to GND on 15 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the LR1121.

How big is a typical board using the LR1121?

The median is 17 × 12 mm, and 0% are two-layer designs.

What is the most popular open source board using the LR1121?

By GitHub stars, Wio LR1121 Module v0.9 by Josephrp, with 12 stars.

Can I simulate one of these boards using the LR1121 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part