15 open source boards using the TMP-881
Real designs built with the TMP-881, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Wio LR1121 Module v0.9
dhirptl
17 × 12 mm69 parts4LMIT3Wio LR1121 Module v0.9
Videocraft10
17 × 12 mm69 parts4LMIT2Wio LR1121 Module v0.9
feastorg
17 × 12 mm69 parts4LCC0-1.01Wio LR1121 Module v0.9
sinismylastname
17 × 12 mm69 parts4LNo license1Wio LR1121 Module v0.9
Protract-123
17 × 12 mm69 parts4LNo license0Wio LR1121 Module v0.9
realBoltDev
17 × 12 mm69 parts4LNo license0Wio LR1121 Module v0.9
samanbeer
17 × 12 mm69 parts4LNo license0Wio LR1121 Module v0.9
newtontriumphant
17 × 12 mm69 parts4LNo license0Wio LR1121 Module v0.9
DwayneCrous
17 × 12 mm69 parts4LNo license0Wio LR1121 Module v0.9
joshujo
17 × 12 mm69 parts4LNo license0Wio LR1121 Module v0.9
AM1NOM
17 × 12 mm69 parts4LMIT0Wio LR1121 Module v0.9
tomonoriyamazaki
17 × 12 mm69 parts4LNo license0Wio LR1121 Module v0.9
jadenvv
17 × 12 mm69 parts4LNo license1Wio LR1121 Module v0.9
sbunger
17 × 12 mm69 parts4LGPL-3.00Wio LR1121 Module v0.9
Josephrp
17 × 12 mm69 parts4LCustom license12
How designs wire the TMP-881
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the TMP-881 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is tied to GND on 15 of 15 designs.
- Pin 2 has a series capacitor on 15 of 15 designs.
- Pin 3 is tied to GND on 15 of 15 designs.
- Pin 9 is tied to GND on 15 of 15 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 100% | — |
| Pin 2 | Connected to: Signal 100% |
|
| Pin 3 | Connected to: GND 100% | — |
| Pin 9 | Connected to: GND 100% | — |
| Pin 10 | Connected to: GND 100% | — |
| Pin 13 | Connected to: GND 100% | — |
| Pin 14 | Connected to: LR1121 100% |
|
| Pin 15 | Connected to: GND 100% | — |
| Pin 16 | Connected to: GND 100% | — |
| Pin 17 | Connected to: GND 100% | — |
| Pin 18 | Connected to: GND 100% | — |
| Pin 19 | Connected to: GND 100% | — |
| Pin 20 | Connected to: VDD_RF 100% |
|
| Pin 21 | Connected to: VDD_RF 100% |
|
| Pin 22 | Connected to: GND 100% | — |
| Pin 23 | Connected to: Signal 100% |
|
| Pin 24 | Connected to: GND 100% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wio LR1121 Module v0.9 by Josephrp, Wio LR1121 Module v0.9 by dhirptl, Wio LR1121 Module v0.9 by Videocraft10 and Wio LR1121 Module v0.9 by feastorg.
The TMP-881 in open source designs
The gallery holds 15 open source boards using the TMP-881 from 15 GitHub repositories; a typical one measures about 17 × 12 mm and carries around 69 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Wio LR1121 Module v0.9 by Josephrp.
Parts used alongside the TMP-881
What boards using the TMP-881 are built for
TMP-881: common questions
Where can I find a TMP-881 reference design?
Each of the 15 boards on this page is a real design using the TMP-881. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TMP-881 pin 1 connected?
Pin 1 is tied to GND on 15 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the TMP-881.
How is the TMP-881 pin 2 connected?
Pin 2 has a series capacitor on 15 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the TMP-881.
How is the TMP-881 pin 3 connected?
Pin 3 is tied to GND on 15 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the TMP-881.
How big is a typical board using the TMP-881?
The median is 17 × 12 mm, and 0% are two-layer designs.
What is the most popular open source board using the TMP-881?
By GitHub stars, Wio LR1121 Module v0.9 by Josephrp, with 12 stars.
Can I simulate one of these boards using the TMP-881 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.