7 open source boards using the LSM6DSVTR

Real designs built with the LSM6DSVTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the LSM6DSVTR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LSM6DSVTR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_IO pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
  • The VDD pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
  • The OCS_AUX pin is left unconnected on 6 of 7 designs.
  • The SDO_AUX pin is left unconnected on 6 of 7 designs.
VDD_IOpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 86% · 100 nF (10), 1 µF (1)
GNDpin 6, 7Connected to: GND 86%
VDDpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 86% · 100 nF (11), 1 µF (1)
OCS_AUXpin 10Connected to: Not connected 86%
SDO_AUXpin 11Connected to: Not connected 86%
CSpin 12Connected to: A connector 29%, the microcontroller 29% · 3.3V 43%
  • Capacitor to GND on 43% · 100 nF (7)
SCLpin 13Connected to: A connector 43%, the microcontroller 43%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (2), 2.2 kΩ (1)
SDApin 14Connected to: A connector 43%, the microcontroller 43%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (2), 2.2 kΩ (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LSM6DSV-Breakout by HackableElectronics, Deltavr controller by oxy-2, RevExBot by priyanshu-ogdev and Main by Team-Micras.

The LSM6DSVTR in open source designs

The gallery holds 7 open source boards using the LSM6DSVTR from 7 GitHub repositories; a typical one measures about 50 × 90 mm and carries around 60 components.

57% use four copper layers or more, and 71% carry an open source license.

The most starred is Deltavr controller by oxy-2.

Microcontrollers on boards using the LSM6DSVTR

LSM6DSVTR: common questions

Where can I find a LSM6DSVTR reference design?

Each of the 7 boards on this page is a real design using the LSM6DSVTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LSM6DSVTR VDD_IO pin?

The VDD_IO pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the LSM6DSVTR.

What decoupling capacitors do designs use on the LSM6DSVTR VDD pin?

The VDD pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the LSM6DSVTR.

How is the LSM6DSVTR OCS_AUX pin connected?

The OCS_AUX pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the LSM6DSVTR.

Which microcontrollers do boards using the LSM6DSVTR use?

Most are built on STM32 (3).

How big is a typical board using the LSM6DSVTR?

The median is 50 × 90 mm, and 43% are two-layer designs.

What is the most popular open source board using the LSM6DSVTR?

By GitHub stars, Deltavr controller by oxy-2, with 2 stars.

Can I simulate one of these boards using the LSM6DSVTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part