3 open source boards using the LT1129-5.0_SOT223
Real designs built with the LT1129-5.0_SOT223, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
AutoWire-Cutter-Stripper
dnatov
59.7 × 38.1 mm16 parts2LNo license0NXP
Avionics ground
usfsoar
86.4 × 59.3 mm21 parts2LNo license9STM32
Drone FC
emilyliiuu
28 × 48 mm43 parts2LNo license0
The LT1129-5.0_SOT223 in open source designs
The gallery holds 3 open source boards using the LT1129-5.0_SOT223 from 3 GitHub repositories; a typical one measures about 59.7 × 48 mm and carries around 21 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Avionics ground by usfsoar.
Parts used alongside the LT1129-5.0_SOT223
Microcontrollers on boards using the LT1129-5.0_SOT223
What boards using the LT1129-5.0_SOT223 are built for
LT1129-5.0_SOT223: common questions
Where can I find a LT1129-5.0_SOT223 reference design?
Each of the 3 boards on this page is a real design using the LT1129-5.0_SOT223. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LT1129-5.0_SOT223 use?
Most are built on AVR/Arduino (1), NXP (1) and STM32 (1).
How big is a typical board using the LT1129-5.0_SOT223?
The median is 59.7 × 48 mm, and 100% are two-layer designs.
What is the most popular open source board using the LT1129-5.0_SOT223?
By GitHub stars, Avionics ground by usfsoar, with 9 stars.
Can I simulate one of these boards using the LT1129-5.0_SOT223 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.