9 open source boards using the MC68030RC

Real designs built with the MC68030RC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

The MC68030RC in open source designs

The gallery holds 9 open source boards using the MC68030RC from 4 GitHub repositories; a typical one measures about 210 × 150 mm and carries around 107 components.

89% use four copper layers or more, and 89% carry an open source license.

The most starred is Mackerel-30 by crmaykish.

Parts used alongside the MC68030RC

Microcontrollers on boards using the MC68030RC

What boards using the MC68030RC are built for

MC68030RC: common questions

Where can I find a MC68030RC reference design?

Each of the 9 boards on this page is a real design using the MC68030RC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MC68030RC?

The 74HC245, RTL8019AS, SIMM72 and SST39SF040 appear in the most repositories here.

Which microcontrollers do boards using the MC68030RC use?

Most are built on AVR/Arduino (1).

How big is a typical board using the MC68030RC?

The median is 210 × 150 mm, and 11% are two-layer designs.

What is the most popular open source board using the MC68030RC?

By GitHub stars, Mackerel-30 by crmaykish, with 96 stars.

Can I simulate one of these boards using the MC68030RC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part