3 open source boards using the MCP16311MS
Real designs built with the MCP16311MS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
AnimatronicsController
svenssonjoel
81 × 50 mm89 parts4LGPL-3.01STM32
F9p board
vedderb
75 × 41 mm95 parts4LGPL-3.0145AVR/Arduino
Solar mppt1
reivax-boucoi
100 × 100 mm133 parts4LNo license1
The MCP16311MS in open source designs
The gallery holds 3 open source boards using the MCP16311MS from 3 GitHub repositories; a typical one measures about 81 × 50 mm and carries around 95 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is F9p board by vedderb.
Parts used alongside the MCP16311MS
Microcontrollers on boards using the MCP16311MS
What boards using the MCP16311MS are built for
MCP16311MS: common questions
Where can I find a MCP16311MS reference design?
Each of the 3 boards on this page is a real design using the MCP16311MS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MCP16311MS?
The BMI160, PDS760-13, STM32F405RGTx, TJA1051TK-3 and TPS54561DPRR appear in the most repositories here.
Which microcontrollers do boards using the MCP16311MS use?
Most are built on STM32 (2) and AVR/Arduino (1).
How big is a typical board using the MCP16311MS?
The median is 81 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP16311MS?
By GitHub stars, F9p board by vedderb, with 145 stars.
Can I simulate one of these boards using the MCP16311MS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.