6 open source boards using the MCP1700x-180xxTT
Real designs built with the MCP1700x-180xxTT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Picowalker-32
mamba2410
44.1 × 51 mm50 parts2LNo license9RP2040/RP2350
Low profile with trackball
ryoo14
228.8 × 76.2 mm137 parts2LNo license3Sensor
kaievns
34.9 × 19 mm13 parts4LNo license3STM32
Dev Board STM32F769
MarvinBrth
52 × 52 mm138 parts6LNo license1ESP32
ESP32 Offline GPS MAPS
uzzambutt
75 × 130 mm67 parts4LNo license1STM32
Modbus environment sensor
robinob
76 × 74 mm75 parts2LNo license0
How designs wire the MCP1700x-180xxTT
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP1700x-180xxTT connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 5 of 6 designs, most often 1 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 1.8V 100% |
|
| VIpin 3 | Connected to: 3.3V 83% · a signal 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Picowalker-32 by mamba2410, Sensor by kaievns, Low profile with trackball by ryoo14 and Dev Board STM32F769 by MarvinBrth.
The MCP1700x-180xxTT in open source designs
The gallery holds 6 open source boards using the MCP1700x-180xxTT from 6 GitHub repositories; a typical one measures about 63.5 × 63 mm and carries around 71 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Picowalker-32 by mamba2410.
Parts used alongside the MCP1700x-180xxTT
Microcontrollers on boards using the MCP1700x-180xxTT
What boards using the MCP1700x-180xxTT are built for
MCP1700x-180xxTT: common questions
Where can I find a MCP1700x-180xxTT reference design?
Each of the 6 boards on this page is a real design using the MCP1700x-180xxTT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700x-180xxTT VO pin?
The VO pin has a decoupling capacitor on 5 of 6 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the MCP1700x-180xxTT.
What decoupling capacitors do designs use on the MCP1700x-180xxTT VI pin?
The VI pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the MCP1700x-180xxTT.
Which microcontrollers do boards using the MCP1700x-180xxTT use?
Most are built on STM32 (3), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the MCP1700x-180xxTT?
The median is 63.5 × 63 mm, and 50% are two-layer designs.
What is the most popular open source board using the MCP1700x-180xxTT?
By GitHub stars, Picowalker-32 by mamba2410, with 9 stars.
Can I simulate one of these boards using the MCP1700x-180xxTT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.