12 open source boards using the MCP3208-CI/SL

Real designs built with the MCP3208-CI/SL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the MCP3208-CI/SL

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP3208-CI/SL connects to, and the resistors, capacitors and other passives placed on it.

  • The CH0_1 pin has a series resistor on 4 of 6 designs, most often 33 kΩ (then 100 kΩ).
  • The CH0_1 pin has a capacitor to GND on 4 of 6 designs, most often 10 nF (then 1 µF).
  • The CH1_2 pin has a series resistor on 4 of 6 designs, most often 33 kΩ (then 100 kΩ).
  • The CH1_2 pin has a capacitor to GND on 4 of 6 designs, most often 10 nF (then 1 µF).
CH0_1pin 1Connected to: Signal 100%
  • Series resistor on 67% · 33 kΩ (1), 100 kΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 67% · 10 nF (2), 1 µF (1), 100 nF (1)
CH1_2pin 2Connected to: Signal 100%
  • Series resistor on 67% · 33 kΩ (1), 100 kΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 67% · 10 nF (2), 1 µF (1), 100 nF (1)
CH2_3pin 3Connected to: Signal 100%
  • Series resistor on 67% · 33 kΩ (1), 100 kΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 67% · 10 nF (2), 1 µF (1), 100 nF (1)
  • Pull-up to 5V on 33% · 1 MΩ (1), 10 kΩ (1)
CH3_4pin 4Connected to: Signal 83% · GND 17%
  • Series resistor on 67% · 33 kΩ (1), 150 kΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 67% · 10 nF (2), 1 µF (1), 100 nF (1)
CH4_5pin 5Connected to: Signal 83% · GND 17%
  • Series resistor on 67% · 33 kΩ (1), 150 kΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 67% · 10 nF (2), 1 µF (1), 100 nF (1)
CH5_6pin 6Connected to: Signal 67% · not connected 17% · GND 17%
  • Series resistor on 67% · 1 kΩ (2), 33 kΩ (1), 150 kΩ (1)
  • Capacitor to GND on 50% · 10 nF (2), 470 nF (1)
CH6_7pin 7Connected to: Signal 67% · not connected 17% · GND 17%
  • Series resistor on 50% · 33 kΩ (1), 150 kΩ (1), 1 kΩ (1)
  • Capacitor to GND on 50% · 10 nF (2), 100 nF (1)
  • Resistor to GND on 33% · 100 kΩ (1), 10 kΩ (1)
CH7_8pin 8Connected to: Signal 67% · not connected 17% · GND 17%
  • Series resistor on 67% · 33 kΩ (1), 10 kΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 50% · 10 nF (2), 1 µF (1)
DGND_9pin 9Connected to: GND 100%
AGND_14pin 14Connected to: GND 100%
VREF_15pin 15Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 67% · 1 µF (4), 100 nF (2)
VDD_16pin 16Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 67% · 100 nF (6), 1 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BluetoothPedal Server by skngh, Big One, Little One by asmr-systems, Shunt reversal by fl4p and NIVA-pod by https-shubhamsahu.

The MCP3208-CI/SL in open source designs

The gallery holds 12 open source boards using the MCP3208-CI/SL from 6 GitHub repositories; a typical one measures about 145 × 80 mm and carries around 96 components.

75% use four copper layers or more, and 33% carry an open source license.

The most starred is BluetoothPedal Server by skngh.

Microcontrollers on boards using the MCP3208-CI/SL

What boards using the MCP3208-CI/SL are built for

MCP3208-CI/SL: common questions

Where can I find a MCP3208-CI/SL reference design?

Each of the 12 boards on this page is a real design using the MCP3208-CI/SL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP3208-CI/SL CH0_1 pin?

The CH0_1 pin has a series resistor on 4 of 6 designs, most often 33 kΩ (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP3208-CI/SL.

What resistor goes on the MCP3208-CI/SL CH1_2 pin?

The CH1_2 pin has a series resistor on 4 of 6 designs, most often 33 kΩ (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP3208-CI/SL.

What resistor goes on the MCP3208-CI/SL CH2_3 pin?

The CH2_3 pin has a series resistor on 4 of 6 designs, most often 33 kΩ (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP3208-CI/SL.

Which microcontrollers do boards using the MCP3208-CI/SL use?

Most are built on ESP32 (2), FPGA (2) and STM32 (1).

How big is a typical board using the MCP3208-CI/SL?

The median is 145 × 80 mm, and 25% are two-layer designs.

What is the most popular open source board using the MCP3208-CI/SL?

By GitHub stars, BluetoothPedal Server by skngh, with 9 stars.

Can I simulate one of these boards using the MCP3208-CI/SL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part