5 open source boards using the MCP4822-E/SN
Real designs built with the MCP4822-E/SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
ComposerMIDICV
CopycatMusic
20 × 110 mm86 parts2LAGPL-3.01AVR/Arduino
PID Board SMT
AaronDoubert
100 × 100 mm184 parts2LNo license0AVR/Arduino
Kicad cpu board smt
matthewcieplak
78.5 × 69 mm56 parts2LNo license171RP2040/RP2350
TiNRS Wobbler2
ThisIsNotRocketScience
60.3 × 106.5 mm180 parts2LMIT87RP2040/RP2350
Pi mini zero adapter
damercer
65.4 × 54.6 mm33 parts2LCC-BY-SA-4.03
How designs wire the MCP4822-E/SN
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP4822-E/SN connects to, and the resistors, capacitors and other passives placed on it.
- The LDAC pin is tied to GND on 5 of 5 designs.
- The VB pin has a series resistor on 3 of 5 designs, most often 38.3 kΩ (then 3.9 kΩ).
- The VA pin has a series resistor on 3 of 5 designs, most often 38.3 kΩ (then 3.9 kΩ).
- The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 5V 100% |
|
| LDACpin 5 | Connected to: GND 100% | — |
| VBpin 6 | Connected to: Signal 100% |
|
| VSSpin 7 | Connected to: GND 100% | — |
| VApin 8 | Connected to: Signal 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad cpu board smt by matthewcieplak, TiNRS Wobbler2 by ThisIsNotRocketScience, Pi mini zero adapter by damercer and ComposerMIDICV by CopycatMusic.
The MCP4822-E/SN in open source designs
The gallery holds 5 open source boards using the MCP4822-E/SN from 5 GitHub repositories; a typical one measures about 65.4 × 100 mm and carries around 86 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Kicad cpu board smt by matthewcieplak.
Microcontrollers on boards using the MCP4822-E/SN
What boards using the MCP4822-E/SN are built for
MCP4822-E/SN: common questions
Where can I find a MCP4822-E/SN reference design?
Each of the 5 boards on this page is a real design using the MCP4822-E/SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP4822-E/SN LDAC pin connected?
The LDAC pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP4822-E/SN.
What resistor goes on the MCP4822-E/SN VB pin?
The VB pin has a series resistor on 3 of 5 designs, most often 38.3 kΩ (then 3.9 kΩ). Counted from the KiCad layouts of 5 open source designs using the MCP4822-E/SN.
What resistor goes on the MCP4822-E/SN VA pin?
The VA pin has a series resistor on 3 of 5 designs, most often 38.3 kΩ (then 3.9 kΩ). Counted from the KiCad layouts of 5 open source designs using the MCP4822-E/SN.
Which microcontrollers do boards using the MCP4822-E/SN use?
Most are built on AVR/Arduino (2), RP2040/RP2350 (2) and Raspberry Pi (1).
How big is a typical board using the MCP4822-E/SN?
The median is 65.4 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP4822-E/SN?
By GitHub stars, Kicad cpu board smt by matthewcieplak, with 171 stars.
Can I simulate one of these boards using the MCP4822-E/SN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.