3 open source boards using the MIC23050-SYML

Real designs built with the MIC23050-SYML, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The MIC23050-SYML in open source designs

The gallery holds 3 open source boards using the MIC23050-SYML from 3 GitHub repositories; a typical one measures about 32 × 20 mm and carries around 55 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Riscboy by Wren6991.

Parts used alongside the MIC23050-SYML

Microcontrollers on boards using the MIC23050-SYML

What boards using the MIC23050-SYML are built for

MIC23050-SYML: common questions

Where can I find a MIC23050-SYML reference design?

Each of the 3 boards on this page is a real design using the MIC23050-SYML. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MIC23050-SYML?

The 74LVC2T45RA3, STM32G431KBUx and TPD2EUSB30A appear in the most repositories here.

Which microcontrollers do boards using the MIC23050-SYML use?

Most are built on STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the MIC23050-SYML?

The median is 32 × 20 mm, and 100% are two-layer designs.

What is the most popular open source board using the MIC23050-SYML?

By GitHub stars, Riscboy by Wren6991, with 511 stars.

Can I simulate one of these boards using the MIC23050-SYML before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part