9 open source boards using the TPD2EUSB30A
Real designs built with the TPD2EUSB30A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865STM32
Honeydew
ghostlybutterfly
331.8 × 166.1 mm278 parts2LCERN-OHL-S-2.033STM32
Honeydew
Kaleidogeist
331.8 × 166.1 mm278 parts2LCERN-OHL-S-2.033ESP32
P4eregrine
anticitizn
39.5 × 39.5 mm314 parts6LNo license15Nordic nRF
NRF52840-microstamp
cheyao
37 × 25 mm45 parts4LNo license1STM32
Aurora-Watch
CooperW824
36 × 36 mm79 parts4LMIT0STM32
Pilkki
Kalapaja
32 × 20 mm55 parts2LGPL-3.00STM32
Pilkki
SmallSharky
32 × 20 mm55 parts2LGPL-3.00ESP32
Env sens
hpvdt
60 × 60 mm36 parts2LNo license0
How designs wire the TPD2EUSB30A
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPD2EUSB30A connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D+pin 1 | Connected to: A connector 78%, the microcontroller 67% |
|
| D-pin 2 | Connected to: A connector 78%, the microcontroller 67% |
|
| GNDpin 3 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Icepi zero by cheyao, Honeydew by ghostlybutterfly, Honeydew by Kaleidogeist and P4eregrine by anticitizn.
The TPD2EUSB30A in open source designs
The gallery holds 9 open source boards using the TPD2EUSB30A from 9 GitHub repositories; a typical one measures about 39.5 × 36 mm and carries around 79 components.
56% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Icepi zero by cheyao.
Parts used alongside the TPD2EUSB30A
Microcontrollers on boards using the TPD2EUSB30A
What boards using the TPD2EUSB30A are built for
TPD2EUSB30A: common questions
Where can I find a TPD2EUSB30A reference design?
Each of the 9 boards on this page is a real design using the TPD2EUSB30A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPD2EUSB30A?
The 74LVC2T45RA3, MIC23050-SYML, STM32F072RBT6, STM32G431KBUx and TLV62569DBV appear in the most repositories here.
Which microcontrollers do boards using the TPD2EUSB30A use?
Most are built on STM32 (5), ESP32 (2), FPGA (1) and Nordic nRF (1).
How big is a typical board using the TPD2EUSB30A?
The median is 39.5 × 36 mm, and 56% are two-layer designs.
What is the most popular open source board using the TPD2EUSB30A?
By GitHub stars, Icepi zero by cheyao, with 865 stars.
Can I simulate one of these boards using the TPD2EUSB30A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.