4 open source boards using the MIC5323-3.3YD5_TR

Real designs built with the MIC5323-3.3YD5_TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The MIC5323-3.3YD5_TR in open source designs

The gallery holds 4 open source boards using the MIC5323-3.3YD5_TR from 3 GitHub repositories; a typical one measures about 113 × 75 mm and carries around 58 components.

100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is Peacock by george-norton.

Microcontrollers on boards using the MIC5323-3.3YD5_TR

What boards using the MIC5323-3.3YD5_TR are built for

MIC5323-3.3YD5_TR: common questions

Where can I find a MIC5323-3.3YD5_TR reference design?

Each of the 4 boards on this page is a real design using the MIC5323-3.3YD5_TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MIC5323-3.3YD5_TR use?

Most are built on ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the MIC5323-3.3YD5_TR?

The median is 113 × 75 mm, and 100% are two-layer designs.

What is the most popular open source board using the MIC5323-3.3YD5_TR?

By GitHub stars, Peacock by george-norton, with 307 stars.

Can I simulate one of these boards using the MIC5323-3.3YD5_TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part