2 open source boards using the MIC5365-1.8YC5-TR
Real designs built with the MIC5365-1.8YC5-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Scampi
mackieks
20 × 20 mm55 parts2LSHL-2.112AVR/Arduino
Thundervolt lite
mackieks
46.9 × 54.8 mm46 parts4LNo license35
The MIC5365-1.8YC5-TR in open source designs
The gallery holds 2 open source boards using the MIC5365-1.8YC5-TR from 2 GitHub repositories; a typical one measures about 33.5 × 37.4 mm and carries around 51 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Thundervolt lite by mackieks.
Parts used alongside the MIC5365-1.8YC5-TR
Microcontrollers on boards using the MIC5365-1.8YC5-TR
What boards using the MIC5365-1.8YC5-TR are built for
MIC5365-1.8YC5-TR: common questions
Where can I find a MIC5365-1.8YC5-TR reference design?
Each of the 2 boards on this page is a real design using the MIC5365-1.8YC5-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5365-1.8YC5-TR use?
Most are built on AVR/Arduino (2).
How big is a typical board using the MIC5365-1.8YC5-TR?
The median is 33.5 × 37.4 mm, and 50% are two-layer designs.
What is the most popular open source board using the MIC5365-1.8YC5-TR?
By GitHub stars, Thundervolt lite by mackieks, with 35 stars.
Can I simulate one of these boards using the MIC5365-1.8YC5-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.