7 open source boards using the MIC5528-3.3YMT-T5

Real designs built with the MIC5528-3.3YMT-T5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The MIC5528-3.3YMT-T5 in open source designs

The gallery holds 7 open source boards using the MIC5528-3.3YMT-T5 from 3 GitHub repositories; a typical one measures about 23.9 × 27.1 mm and carries around 50 components.

86% use four copper layers or more, and 86% carry an open source license.

The most starred is PMK 180mm by PumaFPV.

Parts used alongside the MIC5528-3.3YMT-T5

Microcontrollers on boards using the MIC5528-3.3YMT-T5

What boards using the MIC5528-3.3YMT-T5 are built for

MIC5528-3.3YMT-T5: common questions

Where can I find a MIC5528-3.3YMT-T5 reference design?

Each of the 7 boards on this page is a real design using the MIC5528-3.3YMT-T5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MIC5528-3.3YMT-T5 use?

Most are built on ESP32 (4) and RP2040/RP2350 (3).

How big is a typical board using the MIC5528-3.3YMT-T5?

The median is 23.9 × 27.1 mm, and 14% are two-layer designs.

What is the most popular open source board using the MIC5528-3.3YMT-T5?

By GitHub stars, PMK 180mm by PumaFPV, with 4 stars.

Can I simulate one of these boards using the MIC5528-3.3YMT-T5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part