5 open source boards using the molex_48pin_MRE
Real designs built with the molex_48pin_MRE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Hw 55 te
rusefi
154 × 109 mm58 parts2LNo license3STM32
OpenEMS
pbuchabqui
80.6 × 93.7 mm239 parts2LNo license0Hw 68 vag
rusefi
149 × 140 mm192 parts2LNo license0ESP32
Mre hw motronic
ksmola
175 × 129 mm51 parts2LNo license0STM32
MicroRusEFI
rusefi
80.6 × 93.7 mm235 parts2LNo license48
How designs wire the molex_48pin_MRE
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the molex_48pin_MRE connects to, and the resistors, capacitors and other passives placed on it.
- The 2 pin is tied to GND on 5 of 5 designs.
- The 6 pin is tied to GND on 5 of 5 designs.
- The 39 pin is tied to 5V on 5 of 5 designs.
- The 1 pin is tied to 12V on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1pin 1 | Connected to: 12V 80% · a signal 20% | — |
| 2pin 2 | Connected to: GND 100% | — |
| 3pin 3 | Connected to: TLE8888QK 40% |
|
| 4pin 4 | Connected to: TLE9201SG 40% · not connected 20% |
|
| 6pin 6 | Connected to: GND 100% | — |
| 8pin 8 | Connected to: TLE9201SG 40% · not connected 20% |
|
| 9pin 9 | Connected to: Signal 100% |
|
| 10pin 10 | Connected to: Signal 100% |
|
| 11pin 11 | Connected to: Signal 100% |
|
| 12pin 12 | Connected to: Signal 80% · not connected 20% |
|
| 13pin 13 | Connected to: Signal 100% |
|
| 14pin 14 | Connected to: Signal 100% |
|
| 17pin 17 | Connected to: GND 80% · a signal 20% | — |
| 18pin 18 | Connected to: Signal 100% |
|
| 19pin 19 | Connected to: Signal 80% · not connected 20% |
|
| 20pin 20 | Connected to: Signal 100% |
|
| 21pin 21 | Connected to: GND 80% · a signal 20% | — |
| 22pin 22 | Connected to: Signal 80% · not connected 20% |
|
| 23pin 23 | Connected to: Signal 100% |
|
| 24pin 24 | Connected to: Signal 100% |
|
| 25pin 25 | Connected to: Signal 100% |
|
| 26pin 26 | Connected to: Signal 100% |
|
| 27pin 27 | Connected to: Signal 100% |
|
| 28pin 28 | Connected to: TLE8888QK 40%, VNLD5090 40% |
|
| 30pin 30 | Connected to: Signal 100% |
|
| 31pin 31 | Connected to: Signal 100% |
|
| 32pin 32 | Connected to: TLE8888QK 40%, VNLD5090 40% |
|
| 36pin 36 | Connected to: TLE8888QK 40%, VNLD5090 40% |
|
| 37pin 37 | Connected to: TLE8888QK 40% · not connected 20% |
|
| 39pin 39 | Connected to: 5V 100% | — |
| 40pin 40 | Connected to: TLE8888QK 40%, VNLD5090 40% |
|
| 44pin 44 | Connected to: 5.1V 80% · not connected 20% | — |
| 45pin 45 | Connected to: Signal 100% |
|
| 46pin 46 | Connected to: Signal 100% |
|
| 47pin 47 | Connected to: TLE8888QK 40% |
|
| 48pin 48 | Connected to: TLE8888QK 40% |
|
| J32pin J32 | Connected to: GND 75% · a signal 25% | — |
| J51pin J51 | Connected to: TLE8888QK 50% · not connected 25% |
|
| J52pin J52 | Connected to: TLE8888QK 50% · not connected 25% |
|
| J53pin J53 | Connected to: TLE8888QK 50% · not connected 25% |
|
66 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MicroRusEFI by rusefi, Hw 55 te by rusefi, Mre hw motronic by ksmola and OpenEMS by pbuchabqui.
The molex_48pin_MRE in open source designs
The gallery holds 5 open source boards using the molex_48pin_MRE from 5 GitHub repositories; a typical one measures about 149 × 109 mm and carries around 192 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is MicroRusEFI by rusefi.
Parts used alongside the molex_48pin_MRE
What boards using the molex_48pin_MRE are built for
molex_48pin_MRE: common questions
Where can I find a molex_48pin_MRE reference design?
Each of the 5 boards on this page is a real design using the molex_48pin_MRE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the molex_48pin_MRE 2 pin connected?
The 2 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the molex_48pin_MRE.
How is the molex_48pin_MRE 6 pin connected?
The 6 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the molex_48pin_MRE.
How is the molex_48pin_MRE 39 pin connected?
The 39 pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the molex_48pin_MRE.
What parts are used alongside the molex_48pin_MRE?
The VNLD5090, LM1117-3.3, MCP6004, MIC4427 and TLE8888QK appear in the most repositories here.
Which microcontrollers do boards using the molex_48pin_MRE use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the molex_48pin_MRE?
The median is 149 × 109 mm, and 100% are two-layer designs.
What is the most popular open source board using the molex_48pin_MRE?
By GitHub stars, MicroRusEFI by rusefi, with 48 stars.
Can I simulate one of these boards using the molex_48pin_MRE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.