11 open source boards using the VNLD5090
Real designs built with the VNLD5090, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Micro rusEFI
rusefi
80.6 × 93.7 mm238 parts2LNo license98STM32
Polygonus
FOME-Tech
103 × 82.4 mm299 parts4LNo license21Closed deck x4
OpenLogicEFI
115.5 × 96.2 mm212 parts4LNo license18STM32
Daveecu2
miata-bot
160 × 117.5 mm223 parts4LNo license3STM32
OpenEMS
pbuchabqui
80.6 × 93.7 mm239 parts2LNo license0Hw 68 vag
rusefi
149 × 140 mm192 parts2LNo license0STM32
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi
267 × 300 mm235 parts2LNo license98Lowside
rusefi
101 × 22 mm96 parts4LNo license13STM32
Output.Panel R0.5.1 300x300 2layer step1 Modified 1and5 only
rusefi
18.8 × 17.8 mm235 parts2LNo license98STM32
Panel R0.5.1 300x300 2layer step1
rusefi
267 × 300 mm235 parts2LNo license98STM32
MicroRusEFI
rusefi
80.6 × 93.7 mm235 parts2LNo license48
How designs wire the VNLD5090
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the VNLD5090 connects to, and the resistors, capacitors and other passives placed on it.
- The IN1 pin has a series resistor on 8 of 8 designs, most often 1 kΩ (then 0 Ω).
- The IN2 pin has a series resistor on 8 of 8 designs, most often 1 kΩ (then 0 Ω).
- The STATUS1 pin is left unconnected on 8 of 8 designs.
- The STATUS2 pin is left unconnected on 8 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN1pin 1 | Connected to: TLE8888QK 25% |
|
| STATUS1pin 2 | Connected to: Not connected 100% | — |
| IN2pin 3 | Connected to: TLE8888QK 25% |
|
| STATUS2pin 4 | Connected to: Not connected 100% | — |
| S2pin 5 | Connected to: GND 100% | — |
| D2pin 6 | Connected to: A connector 38%, TLE8888QK 25%, molex_48pin_MRE 25% |
|
| S1pin 7 | Connected to: GND 100% | — |
| D1pin 8 | Connected to: A connector 38%, TLE8888QK 25%, molex_48pin_MRE 25% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Micro rusEFI by rusefi, MicroRusEFI by rusefi, Polygonus by FOME-Tech and Closed deck x4 by OpenLogicEFI.
The VNLD5090 in open source designs
The gallery holds 11 open source boards using the VNLD5090 from 8 GitHub repositories; a typical one measures about 103 × 93.7 mm and carries around 235 components.
64% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Micro rusEFI by rusefi.
Parts used alongside the VNLD5090
Microcontrollers on boards using the VNLD5090
What boards using the VNLD5090 are built for
VNLD5090: common questions
Where can I find a VNLD5090 reference design?
Each of the 11 boards on this page is a real design using the VNLD5090. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the VNLD5090 IN1 pin?
The IN1 pin has a series resistor on 8 of 8 designs, most often 1 kΩ (then 0 Ω). Counted from the KiCad layouts of 8 open source designs using the VNLD5090.
What resistor goes on the VNLD5090 IN2 pin?
The IN2 pin has a series resistor on 8 of 8 designs, most often 1 kΩ (then 0 Ω). Counted from the KiCad layouts of 8 open source designs using the VNLD5090.
How is the VNLD5090 STATUS1 pin connected?
The STATUS1 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the VNLD5090.
What parts are used alongside the VNLD5090?
The LM1117-3.3, MIC4427, molex_48pin_MRE, TLE9201SG and MCP6004 appear in the most repositories here.
Which microcontrollers do boards using the VNLD5090 use?
Most are built on STM32 (8).
How big is a typical board using the VNLD5090?
The median is 103 × 93.7 mm, and 64% are two-layer designs.
What is the most popular open source board using the VNLD5090?
By GitHub stars, Micro rusEFI by rusefi, with 98 stars.
Can I simulate one of these boards using the VNLD5090 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.