7 open source boards using the MP1584_MODULE
Real designs built with the MP1584_MODULE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Ic880a backplane
dbrgn
93.9 × 83.8 mm34 parts2LTAPR-OHL-1.015ESP32
PCB Watersysteem
Vertical-Farming-IB3
89.3 × 100 mm88 parts2LNo license2BMS
Wierdwizard2587
179 × 44 mm64 parts2LNo license1ESP8266
Dimled mini
tqlabs-in
50 × 24.5 mm15 parts2LMIT1Mkssbase
bullestock
46 × 79.3 mm50 parts2LNo license4ESP32
TeamPlantenbak
Vertical-Farming-IB3
49.9 × 72.7 mm60 parts2LNo license2Mkssbase
Hal9k-dk
46 × 79.3 mm50 parts2LNo license0
How designs wire the MP1584_MODULE
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MP1584_MODULE connects to, and the resistors, capacitors and other passives placed on it.
- The OUT- pin is tied to GND on 4 of 4 designs.
- Pin IN+ has a capacitor to GND on 2 of 2 designs, most often 100 µF.
- Pin OUT+ has a capacitor to GND on 2 of 2 designs, most often 100 µF.
- Pin IN- is tied to GND on 2 of 2 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUT-pin 4 | Connected to: GND 100% | — |
| Pin IN+ | Connected to: A connector 100% |
|
| Pin IN- | Connected to: GND 100% | — |
| Pin OUT+ | Connected to: A connector 100% |
|
| Pin OUT- | Connected to: GND 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ic880a backplane by dbrgn, Mkssbase by bullestock, PCB Watersysteem by Vertical-Farming-IB3 and Dimled mini by tqlabs-in.
The MP1584_MODULE in open source designs
The gallery holds 7 open source boards using the MP1584_MODULE from 6 GitHub repositories; a typical one measures about 50 × 79.3 mm and carries around 50 components.
100% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Ic880a backplane by dbrgn.
Parts used alongside the MP1584_MODULE
Microcontrollers on boards using the MP1584_MODULE
What boards using the MP1584_MODULE are built for
MP1584_MODULE: common questions
Where can I find a MP1584_MODULE reference design?
Each of the 7 boards on this page is a real design using the MP1584_MODULE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MP1584_MODULE OUT- pin connected?
The OUT- pin is tied to GND on 4 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the MP1584_MODULE.
How is the MP1584_MODULE pin IN+ connected?
Pin IN+ has a capacitor to GND on 2 of 2 designs, most often 100 µF. Counted from the KiCad layouts of 6 open source designs using the MP1584_MODULE.
How is the MP1584_MODULE pin OUT+ connected?
Pin OUT+ has a capacitor to GND on 2 of 2 designs, most often 100 µF. Counted from the KiCad layouts of 6 open source designs using the MP1584_MODULE.
What parts are used alongside the MP1584_MODULE?
The AMS1117-3.3, 74HCT04, 74HCT08, 74LV11 and MAX485E appear in the most repositories here.
Which microcontrollers do boards using the MP1584_MODULE use?
Most are built on ESP32 (2), ESP8266 (1) and Raspberry Pi (1).
How big is a typical board using the MP1584_MODULE?
The median is 50 × 79.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the MP1584_MODULE?
By GitHub stars, Ic880a backplane by dbrgn, with 15 stars.
Can I simulate one of these boards using the MP1584_MODULE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.