3 open source boards using the MP2315GJ-Z

Real designs built with the MP2315GJ-Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The MP2315GJ-Z in open source designs

The gallery holds 3 open source boards using the MP2315GJ-Z from 3 GitHub repositories; a typical one measures about 71.7 × 71.3 mm and carries around 41 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Pi HAT V4 by danielwilczak101.

Microcontrollers on boards using the MP2315GJ-Z

What boards using the MP2315GJ-Z are built for

MP2315GJ-Z: common questions

Where can I find a MP2315GJ-Z reference design?

Each of the 3 boards on this page is a real design using the MP2315GJ-Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MP2315GJ-Z use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the MP2315GJ-Z?

The median is 71.7 × 71.3 mm, and 33% are two-layer designs.

What is the most popular open source board using the MP2315GJ-Z?

By GitHub stars, Pi HAT V4 by danielwilczak101, with 4 stars.

Can I simulate one of these boards using the MP2315GJ-Z before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part