6 open source boards using the MP34DT05TR-A

Real designs built with the MP34DT05TR-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MP34DT05TR-A

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MP34DT05TR-A connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
  • Pin 6 is left unconnected on 4 of 4 designs.
  • Pin 7 is left unconnected on 4 of 4 designs.
  • Pin 8 is left unconnected on 4 of 4 designs.
VDDpin 1Connected to: 3.3V 67% · GND 17% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (4), 1 µF (3), 4.7 µF (1)
GNDpin 5Connected to: GND 100%
Pin 6Connected to: Not connected 100%
Pin 7Connected to: Not connected 100%
Pin 8Connected to: Not connected 100%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Spcl midge hardware by TUDelft-SPC-Lab, Mic pcb by frankemcgarvey, Orleon hw by golioth and Phial hw by golioth.

The MP34DT05TR-A in open source designs

The gallery holds 6 open source boards using the MP34DT05TR-A from 6 GitHub repositories; a typical one measures about 29 × 27 mm and carries around 71 components.

80% use four copper layers or more, and 67% carry an open source license.

The most starred is Spcl midge hardware by TUDelft-SPC-Lab.

Parts used alongside the MP34DT05TR-A

Microcontrollers on boards using the MP34DT05TR-A

What boards using the MP34DT05TR-A are built for

MP34DT05TR-A: common questions

Where can I find a MP34DT05TR-A reference design?

Each of the 6 boards on this page is a real design using the MP34DT05TR-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MP34DT05TR-A VDD pin?

The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the MP34DT05TR-A.

How is the MP34DT05TR-A pin 6 connected?

Pin 6 is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the MP34DT05TR-A.

How is the MP34DT05TR-A pin 7 connected?

Pin 7 is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the MP34DT05TR-A.

What parts are used alongside the MP34DT05TR-A?

The ATECC608B-MAHDA, BME280, LF21115TMR, LIS2DH and WLA.04 appear in the most repositories here.

Which microcontrollers do boards using the MP34DT05TR-A use?

Most are built on Nordic nRF (3), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the MP34DT05TR-A?

The median is 29 × 27 mm, and 20% are two-layer designs.

What is the most popular open source board using the MP34DT05TR-A?

By GitHub stars, Spcl midge hardware by TUDelft-SPC-Lab, with 1 stars.

Can I simulate one of these boards using the MP34DT05TR-A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part