4 open source boards using the MPM3506AGQV-P
Real designs built with the MPM3506AGQV-P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esphome rgbcct led controller
mikelawrence
100 × 45 mm82 parts6LCERN-OHL-P-2.01ESP32
Esphome fan controller
mikelawrence
25 × 42.5 mm48 parts2LCERN-OHL-P-2.00ESP32
Stencil
mikelawrence
100 × 45 mm82 parts6LCERN-OHL-P-2.01ESP32
Stencil
mikelawrence
25 × 42.5 mm47 parts4LCERN-OHL-P-2.00
The MPM3506AGQV-P in open source designs
The gallery holds 4 open source boards using the MPM3506AGQV-P from 2 GitHub repositories; a typical one measures about 62.5 × 43.8 mm and carries around 65 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is Esphome rgbcct led controller by mikelawrence.
Parts used alongside the MPM3506AGQV-P
Microcontrollers on boards using the MPM3506AGQV-P
What boards using the MPM3506AGQV-P are built for
MPM3506AGQV-P: common questions
Where can I find a MPM3506AGQV-P reference design?
Each of the 4 boards on this page is a real design using the MPM3506AGQV-P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MPM3506AGQV-P use?
Most are built on ESP32 (4).
How big is a typical board using the MPM3506AGQV-P?
The median is 62.5 × 43.8 mm, and 25% are two-layer designs.
What is the most popular open source board using the MPM3506AGQV-P?
By GitHub stars, Esphome rgbcct led controller by mikelawrence, with 1 stars.
Can I simulate one of these boards using the MPM3506AGQV-P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.