6 open source boards using the MT9700-N
Real designs built with the MT9700-N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
WCH CH32/CH55x
SandKrux
sandman21vs
58.3 × 98.2 mm163 parts2LNo license21ESP32
Melbourne-Live-Train-Map
CDFER
330 × 300 mm1240 parts2LGPL-3.05RP2040/RP2350
Panelized-4layer
openconcepts-ar
114.6 × 70.2 mm209 parts4LCustom license1RP2040/RP2350
Mck parting board
preyneyv
136.6 × 66.5 mm67 parts4LNo license0RP2040/RP2350
Pcb
openconcepts-ar
69.6 × 29.4 mm154 parts4LCustom license1PLC4UNI MEZANINI
0sirys
30.7 × 40.6 mm24 parts2LMIT0
How designs wire the MT9700-N
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MT9700-N connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 220 µF).
- The SET pin has a resistor to GND on 2 of 4 designs, most often 10 kΩ (then 5.1 kΩ).
- The EN pin has a resistor to GND on 2 of 4 designs, most often 5.1 kΩ (then 6.8 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTpin 1 | Connected to: 5V 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| SETpin 3 | Connected to: Signal 75% · not connected 25% |
|
| ENpin 4 | Connected to: The microcontroller 50% |
|
| VINpin 5 | Connected to: VBUS 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SandKrux by sandman21vs, Melbourne-Live-Train-Map by CDFER, Panelized-4layer by openconcepts-ar and PLC4UNI MEZANINI by 0sirys.
The MT9700-N in open source designs
The gallery holds 6 open source boards using the MT9700-N from 5 GitHub repositories; a typical one measures about 92.1 × 68.3 mm and carries around 159 components.
50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is SandKrux by sandman21vs.
Parts used alongside the MT9700-N
Microcontrollers on boards using the MT9700-N
What boards using the MT9700-N are built for
MT9700-N: common questions
Where can I find a MT9700-N reference design?
Each of the 6 boards on this page is a real design using the MT9700-N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MT9700-N VIN pin?
The VIN pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the MT9700-N.
What decoupling capacitors do designs use on the MT9700-N VOUT pin?
The VOUT pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 220 µF). Counted from the KiCad layouts of 5 open source designs using the MT9700-N.
What resistor goes on the MT9700-N SET pin?
The SET pin has a resistor to GND on 2 of 4 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 5 open source designs using the MT9700-N.
Which microcontrollers do boards using the MT9700-N use?
Most are built on RP2040/RP2350 (3), WCH CH32/CH55x (1) and ESP32 (1).
How big is a typical board using the MT9700-N?
The median is 92.1 × 68.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the MT9700-N?
By GitHub stars, SandKrux by sandman21vs, with 21 stars.
Can I simulate one of these boards using the MT9700-N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.