6 open source boards using the NAU88C22YG

Real designs built with the NAU88C22YG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the NAU88C22YG

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the NAU88C22YG connects to, and the resistors, capacitors and other passives placed on it.

  • The LMICP pin has a series capacitor on 5 of 5 designs, most often 1 µF (then 4.7 µF).
  • The RMICP pin has a series capacitor on 5 of 5 designs, most often 1 µF.
  • The EXP_33 pin is tied to GND on 5 of 5 designs.
  • The VDDC pin has a decoupling capacitor on 4 of 5 designs, most often 4.7 µF (then 100 nF).
LMICPpin 1Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (4), 4.7 µF (1)
LMICNpin 2Connected to: Signal 80% · not connected 20%
  • Series capacitor on 40% · 1 µF (2)
  • Capacitor to GND on 40% · 1 µF (2)
LLIN/GPIO2pin 3Connected to: Not connected 80% · a signal 20%
RMICPpin 4Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (5)
RMICNpin 5Connected to: Signal 80% · not connected 20%
  • Series capacitor on 40% · 1 µF (2)
  • Capacitor to GND on 40% · 1 µF (2)
RLIN/GPIO3pin 6Connected to: Not connected 80% · a signal 20%
VSSDpin 12Connected to: GND 100%
VDDCpin 13Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 4.7 µF (6), 100 nF (2), 22 µF (1)
  • Ferrite bead on 40%
VDDBpin 14Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 4.7 µF (6), 100 nF (2), 10 nF (1)
  • Ferrite bead on 40%
CSB/GPIO1pin 15Connected to: Not connected 60% · GND 20% · a signal 20%
SCLKpin 16Connected to: The microcontroller 40%, a connector 40%
  • Pull-up to 3.3V on 60% · 3.3 kΩ (2), 4.7 kΩ (1)
SDIOpin 17Connected to: The microcontroller 40%, a connector 40%
  • Pull-up to 3.3V on 60% · 3.3 kΩ (2), 4.7 kΩ (1)
MODEpin 18Connected to: GND 80% · a signal 20%
LAUXINpin 19Connected to: Not connected 60% · a signal 40%
  • Series capacitor on 40% · 1 µF (2)
RAUXINpin 20Connected to: Not connected 60% · a signal 40%
  • Series capacitor on 40% · 1 µF (2)
AUXOUT1pin 21Connected to: Not connected 60% · a signal 40%
  • Series capacitor on 40% · 1 µF (2)
AUXOUT2pin 22Connected to: Not connected 60% · a signal 40%
  • Series capacitor on 40% · 1 µF (2)
VSSSPKpin 24Connected to: GND 100%
VDDSPKpin 26Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 4.7 µF (4), 100 nF (2), 22 µF (1)
VREFpin 27Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 4.7 µF (4)
VSSApin 28Connected to: GND 100%
RHPpin 29Connected to: Signal 80% · not connected 20%
  • Series capacitor on 40% · 1 µF (2)
LHPpin 30Connected to: Signal 80% · not connected 20%
  • Series capacitor on 40% · 1 µF (2)
VDDApin 31Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 4.7 µF (4), 100 nF (2), 22 µF (1)
  • Ferrite bead on 40%
MICBIASpin 32Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 4.7 µF (3), 1 µF (1)
  • Series resistor on 80% · 2.2 kΩ (6)
EXP_33pin 33Connected to: GND 100%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sisu SSE-9 by briskspirit, SensactUp4 by klaus-liebler, Base Board Design by WilliamSanchez and Mini v0.3 by northernpaws.

The NAU88C22YG in open source designs

The gallery holds 6 open source boards using the NAU88C22YG from 5 GitHub repositories; a typical one measures about 44.4 × 89 mm and carries around 159 components.

83% use four copper layers or more, and 83% carry an open source license.

The most starred is Sisu SSE-9 by briskspirit.

Microcontrollers on boards using the NAU88C22YG

What boards using the NAU88C22YG are built for

NAU88C22YG: common questions

Where can I find a NAU88C22YG reference design?

Each of the 6 boards on this page is a real design using the NAU88C22YG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NAU88C22YG LMICP pin connected?

The LMICP pin has a series capacitor on 5 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the NAU88C22YG.

How is the NAU88C22YG RMICP pin connected?

The RMICP pin has a series capacitor on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the NAU88C22YG.

How is the NAU88C22YG EXP_33 pin connected?

The EXP_33 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the NAU88C22YG.

Which microcontrollers do boards using the NAU88C22YG use?

Most are built on STM32 (4) and ESP32 (1).

How big is a typical board using the NAU88C22YG?

The median is 44.4 × 89 mm, and 17% are two-layer designs.

What is the most popular open source board using the NAU88C22YG?

By GitHub stars, Sisu SSE-9 by briskspirit, with 18 stars.

Can I simulate one of these boards using the NAU88C22YG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part