6 open source boards using the NCP730BMT330TBG
Real designs built with the NCP730BMT330TBG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
GBB15
skuep
67 × 15 mm72 parts4LMIT51RTB D16
git4dcc
17 × 10.9 mm43 parts6LApache-2.02AVR/Arduino
RTB D98
git4dcc
12.7 × 8.8 mm60 parts4LApache-2.01RTB D20
git4dcc
14 × 8 mm51 parts6LApache-2.01RTB D21
git4dcc
15.2 × 9.5 mm48 parts6LApache-2.01Jetson Orin Baseboard
AtlasAutoware
120 × 90 mm312 parts8LNo license0
How designs wire the NCP730BMT330TBG
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the NCP730BMT330TBG connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 1 µF).
- The OUT pin is tied to 3.3V on 6 of 6 designs.
- The NC/ADJ_2 pin is left unconnected on 5 of 6 designs.
- The EN pin is left unconnected on 4 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 3.3V 100% | — |
| NC/ADJ_2pin 2 | Connected to: Not connected 83% · GND 17% | — |
| GNDpin 3, 7 | Connected to: GND 100% | — |
| ENpin 4 | Connected to: Not connected 67% · VCC 17% · a signal 17% |
|
| PGpin 5 | Connected to: Not connected 67% · GND 33% | — |
| INpin 6 | Connected to: A connector 67%, DRV8231ADSGR 50% · VCC 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GBB15 by skuep, RTB D16 by git4dcc, RTB D20 by git4dcc and RTB D21 by git4dcc.
The NCP730BMT330TBG in open source designs
The gallery holds 6 open source boards using the NCP730BMT330TBG from 6 GitHub repositories; a typical one measures about 16.1 × 10.2 mm and carries around 56 components.
100% use four copper layers or more, and 83% carry an open source license.
The most starred is GBB15 by skuep.
Parts used alongside the NCP730BMT330TBG
Microcontrollers on boards using the NCP730BMT330TBG
What boards using the NCP730BMT330TBG are built for
NCP730BMT330TBG: common questions
Where can I find a NCP730BMT330TBG reference design?
Each of the 6 boards on this page is a real design using the NCP730BMT330TBG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NCP730BMT330TBG IN pin connected?
The IN pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the NCP730BMT330TBG.
How is the NCP730BMT330TBG OUT pin connected?
The OUT pin is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NCP730BMT330TBG.
How is the NCP730BMT330TBG NC/ADJ_2 pin connected?
The NC/ADJ_2 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NCP730BMT330TBG.
What parts are used alongside the NCP730BMT330TBG?
The DRV8231ADSGR, AVR-64DA32 and AVR64DD28-I_STX appear in the most repositories here.
Which microcontrollers do boards using the NCP730BMT330TBG use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the NCP730BMT330TBG?
The median is 16.1 × 10.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the NCP730BMT330TBG?
By GitHub stars, GBB15 by skuep, with 51 stars.
Can I simulate one of these boards using the NCP730BMT330TBG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.