2 open source boards using the NCS20071SN2T1G

Real designs built with the NCS20071SN2T1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The NCS20071SN2T1G in open source designs

The gallery holds 2 open source boards using the NCS20071SN2T1G from 2 GitHub repositories; a typical one measures about 67.2 × 64.4 mm and carries around 238 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Challenge by FAliIAM.

Microcontrollers on boards using the NCS20071SN2T1G

NCS20071SN2T1G: common questions

Where can I find a NCS20071SN2T1G reference design?

Each of the 2 boards on this page is a real design using the NCS20071SN2T1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the NCS20071SN2T1G?

The AP62300WU-7, MCP2542FDT-H/MNY, STM32H725ZGT, TPS25944ARVCR and USB2517 appear in the most repositories here.

Which microcontrollers do boards using the NCS20071SN2T1G use?

Most are built on STM32 (2).

How big is a typical board using the NCS20071SN2T1G?

The median is 67.2 × 64.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the NCS20071SN2T1G?

By GitHub stars, Challenge by FAliIAM, with 0 stars.

Can I simulate one of these boards using the NCS20071SN2T1G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part