5 open source boards using the zldo1117

Real designs built with the zldo1117, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the zldo1117

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the zldo1117 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 is tied to GND on 5 of 5 designs.
  • Pin 2 is tied to 3.3V on 5 of 5 designs.
  • Pin 3 is tied to 5V on 5 of 5 designs.
  • Pin 3 has a decoupling capacitor on 4 of 5 designs, most often 2.2 µF (then 100 nF).
Pin 1Connected to: GND 100%
Pin 2Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 10 µF (2), 100 nF (2), 2.2 µF (1)
Pin 3Connected to: 5V 100%
  • Decoupling capacitor on 80% · 2.2 µF (3), 100 nF (3), 10 µF (1)
Pin 4Connected to: Not connected 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stmbl 4.0 by rene-dev, Stm32-network rs232 by joeferner, TelepresenceRobot by joeferner and Stmbl 4.0 by coon42.

The zldo1117 in open source designs

The gallery holds 5 open source boards using the zldo1117 from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 409 components.

100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Stmbl 4.0 by rene-dev.

Microcontrollers on boards using the zldo1117

What boards using the zldo1117 are built for

zldo1117: common questions

Where can I find a zldo1117 reference design?

Each of the 5 boards on this page is a real design using the zldo1117. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the zldo1117 pin 1 connected?

Pin 1 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the zldo1117.

How is the zldo1117 pin 2 connected?

Pin 2 is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the zldo1117.

How is the zldo1117 pin 3 connected?

Pin 3 is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the zldo1117.

What parts are used alongside the zldo1117?

The ACT4088, IRAM256a, LM358, lnk304D and non_plated appear in the most repositories here.

Which microcontrollers do boards using the zldo1117 use?

Most are built on STM32 (5).

How big is a typical board using the zldo1117?

The median is 100 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the zldo1117?

By GitHub stars, Stmbl 4.0 by rene-dev, with 979 stars.

Can I simulate one of these boards using the zldo1117 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part