2 open source boards using the OLED_128x64
Real designs built with the OLED_128x64, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
STM32F4 -Shield
AhmadHaniF1145
100.5 × 58 mm48 parts2LNo license1AVR/Arduino
7mhz ssb trx
ngs
84.5 × 93.4 mm82 parts2LNo license0
The OLED_128x64 in open source designs
The gallery holds 2 open source boards using the OLED_128x64 from 2 GitHub repositories; a typical one measures about 92.5 × 75.7 mm and carries around 65 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is STM32F4 -Shield by AhmadHaniF1145.
Microcontrollers on boards using the OLED_128x64
What boards using the OLED_128x64 are built for
OLED_128x64: common questions
Where can I find a OLED_128x64 reference design?
Each of the 2 boards on this page is a real design using the OLED_128x64. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OLED_128x64 use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the OLED_128x64?
The median is 92.5 × 75.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the OLED_128x64?
By GitHub stars, STM32F4 -Shield by AhmadHaniF1145, with 1 stars.
Can I simulate one of these boards using the OLED_128x64 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.